RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Clutch is dead. No idea! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/clutch-dead-no-idea-768093/)

Cpt.Zanzibar 07-01-08 02:31 PM

Clutch is dead. No idea!
 
my clutch is down on the floor and im not sure why. i was driving up a hill goin about 35 then i pushed the clutch in as im rolling up to a stop and it just goes to the floor.

the fluid reservoir is full
and the clutch pedal will stay up on its own

it hasnt been slipping at all or making any noises so im thinkin the pump.

any ideas??

Atkins Dan 07-01-08 03:07 PM

clutch master is shot and it is not holding pressure like it should..

I have them in stock is you need one..

Dan

farberio 07-01-08 03:14 PM

Replace the slave cylinder and line while you are in the area as well.

Cpt.Zanzibar 07-01-08 03:16 PM

can i use the turbo slave on the site? there dosnt seem to be an n/a one.

freemanrx7 07-01-08 05:36 PM

SO it is still working properly? If it aint broke don't fix it.

IF you replace anything do all 3 items

Slave
master
rubber hose

well uhhh 07-01-08 06:26 PM

make sure to bleed the hell out of it too. My hydraulics just went out and I still didn't have a clutch after bleeding it a couple times. Turns out air was hiding somewhere. Third times a charm :)

Cpt.Zanzibar 07-02-08 03:38 PM


Originally Posted by freemanrx7 (Post 8337060)
SO it is still working properly? If it aint broke don't fix it.

IF you replace anything do all 3 items

Slave
master
rubber hose

no it isnt working. when i push the pedal down it has no resistance and it stays down, but i can grab it and lift it up and it will stay up on its own. the clutch does not engage.


All times are GMT -5. The time now is 08:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands