RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   carbeurated 2nd gen (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/carbeurated-2nd-gen-111149/)

seventhgear 09-02-02 10:50 PM

carbeurated 2nd gen
 
I BEAT A CARBEURATED ohh sorry 4 the caps carbeurated 13b. not jus beat him but smoked him from a stop and a roll so that ruled out carbeurating my car in my head . makes me think very badly of a carbeurator on a 13b . anyone have another experience?
ohh he has 3mm seals and hes on a 91 engine
lighter rotors!
wither my car was running good or his was running bad
lol i was confused.
ohh and it was a webber carbeurator with 2 msd 6aL ignitions.
peace
jack

Roy James 09-02-02 10:58 PM

What the fuck? He should have SMOKED you left and right. Maybe he cant tune a carb for shit, or your car is the Jesus Send. Either way, good kill... wait.. not in the kill section.. eh.. whatever, its late for me right now. haha

13B2QuIcKNy 09-02-02 11:00 PM

i dont know about that.. my cousin has a 90 gtu,an 88 engine mild street ported...turboII side housings..racing beat 4 port intake with a 650 holley, msd and he smokes me by like 8 or 9 car lengths and i have a 91 na with intake complete exhaust.. including header and midpipe(yeah kinda loud lol)... the carbed 2nd gens are no joke...with the right carb adjustments he runs very low 14's high 13's

seventhgear 09-02-02 11:04 PM

u know i dont think he has any exhaust mods except for mufflers maybe thats keepin power from him. i dont know but it was slow
was really weird made me feel happy yet sad at the same time

suprfast7 09-02-02 11:09 PM

well I raced a 1st gen with a 13b swapped with a street port and we raced drag style with my 87 NA with header 3in exhaust K&N and lots of removed stuff and I whooped him in front of 2 of my friends that own fcS. Me and my 2 friends and the guy i raced are still wondering how I beat a car that is lighter has the same engine with a street port and is carbed. Someone tell me. He drives good too because I rode with him when he was showing me the car.

seventhgear 09-02-02 11:15 PM

hmmm? carbeurated?

nitroracer 09-03-02 12:33 AM

it must of been that BIG oh 3" exhaust for a na

Juan 09-03-02 12:36 AM

I also beat a carburated s4 a while back. At the time I dint know much bout cars but this is what I saw he had: exhaust, some kind of carburator, fuel pressure regulator, and his engine looked rebuilt (it was painted real nice). My s4 was stock with the exception of a race pipe. We went from a stop 3 times and all 3 times I took him out by like 2-3 car lenghts. Guy was mad and he swore my car had a crapload of mods. The look on his face after I popped the hood was priceless. Hehe. I'm pretty sure that he sucked at driving or his carb wasnt tuned right.

I would like to have a carbed FC someday. Maybe get a supercharger/carb setup :)

seventhgear 09-03-02 10:01 AM

WHAT A NICE SETUP THAT WOULD BE WAN what a nice setup . never thought of that ..... or maybe a turbo carbeurated setup??
jack

FPrep2ndGenRX7 09-03-02 11:01 AM

I would say the car wasn't tuned properly. You may get the jump of the line but you shouldn't pull away that easily. He has a few hundred pound weight advantage. Formula Mazda's running a sidedraft carb on a sealed stock port block make about 175HP and its all done with proper tuning. I'm all for fuel injection due to ease of tuning fuel delivery but a weber side draft does look good on a rotary.

emagdnim 09-03-02 12:00 PM

Turbo + Carb = Bad.

Roy James 09-03-02 12:17 PM


Originally posted by emagdnim
Turbo + Carb = Bad.
Um, not nessisarily, it would be better if it was a blow through carb, or if the carb was before the turbo, then its fine. So long as the air flow rating for the carb is more than the turbo is putting out, then you are fine. To my knowledge werent all FBs in Japan 12A Carbed and turboed? I know for a fact alot of people that do circle tracks with 2.3LTurbo Ford blocks run turbos for simplicity and weight. I also saw a 500+hp 351Twin turbo carbed Thunderbird the other day in some paper, i forget where though.

vaughnc 09-03-02 01:51 PM

if the 1st gen was a carbed 13b, he'd really need a 4 barrel/twin carb setup. I know a limited edition 12a owner who has this setup. VERY FAST!!!! - very good power/weight.

GLHS 09-03-02 02:03 PM

Jack,

Is this the car we saw out at Gandy?


I didn't think it was that fast, its sure sounded like a dog to me.


Good kill, keep the talkers quiet, talkin 12.5 and shit.

KNONFS 09-03-02 03:50 PM


Originally posted by Roy James


Um, not nessisarily, it would be better if it was a blow through carb, or if the carb was before the turbo, then its fine. So long as the air flow rating for the carb is more than the turbo is putting out, then you are fine. To my knowledge werent all FBs in Japan 12A Carbed and turboed? I know for a fact alot of people that do circle tracks with 2.3LTurbo Ford blocks run turbos for simplicity and weight. I also saw a 500+hp 351Twin turbo carbed Thunderbird the other day in some paper, i forget where though.

Rafelito runs a Turbo\webber setup...........

KNONFS 09-03-02 03:52 PM

Re: carbeurated 2nd gen
 

Originally posted by seventhgear
I BEAT A CARBEURATED ohh sorry 4 the caps carbeurated 13b. not jus beat him but smoked him from a stop and a roll so that ruled out carbeurating my car in my head . makes me think very badly of a carbeurator on a 13b . anyone have another experience?
ohh he has 3mm seals and hes on a 91 engine
lighter rotors!
wither my car was running good or his was running bad
lol i was confused.
ohh and it was a webber carbeurator with 2 msd 6aL ignitions.
peace
jack

Consider yourself lucky, a well tuned carbed 2nd gen will be faster than a OEM ECU 2nd gen, considering everything else equal.

seventhgear 09-03-02 03:55 PM

YEA I WORKED HIM !
he didnt try to race me again after that . he was talkin like "no one could mess wit me not even the cops" to me that day . " i got chased yesterday and he couldnt catch the 7 ! " lol i laughed inside and then me and my girl laughed ! lol whatever thatz why i dont talk shit.

KNONFS 09-03-02 03:58 PM


Originally posted by seventhgear
YEA I WORKED HIM !
he didnt try to race me again after that . he was talkin like "no one could mess wit me not even the cops" to me that day . " i got chased yesterday and he couldnt catch the 7 ! " lol i laughed inside and then me and my girl laughed ! lol whatever thatz why i dont talk shit.

:bigthumb: :biggrin: :tonque:

seventhgear 09-03-02 04:48 PM

on guy asked me "how many pistons?"
i replied with " its a 36c fuel injected 2 inline rotor on an eccentric shaft "
jus threw some bullshit out and then in return he says
" ohh new huh? "
we were both totally serious up until he walked off and i started dying!
lol

GLHS 09-04-02 12:37 PM

Hey your too funny, Bring your girl over next time, I am sure her and my wife can talk or whatever, while we work on the cars:D

seventhgear 09-04-02 12:53 PM

that would be nice but i need to find a time and day that is good for the both of us

seventhgear 09-04-02 02:31 PM

a pontiac sunfire " ALL hO0Ked uP yO" thought shewas the shit last night and from a roll i downshifted into3rd doing 50 and never saw that car again man my car is smoking things left and right what is up here . my car was soo slow and all of a sudden its broken out of its shell. i know sunfires arent that fast but still ;)
jack

GLHS 09-05-02 09:43 AM

Maybe we got it timed correctly. Remember, it takes some time for the CPU to relearn itself, once something has been changed.


I am going to the NOPI show this Saturday and Sunday, I am going to enter my MP3. I almost have the DVD finished.


All times are GMT -5. The time now is 06:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands