Car just died, won't start now.
Yet another problem for me..ok most of you know I just swapped an S5 turbo into my 88. I started it finally with out any leaks or any signs of a problem. Let it idle for about 10-15 minutes and double check everything and it seemed fine, so I decided to take it for a test drive. As soon as I got down the end of my driveway, my car just died. I thought I stalled it or something so I tried restarting it. All it would do was crank, I thought maybe it flooded for some odd reason so I pulled the EGI fuse and did all that stuff and it still wouldn't start, only cranked. Anyone have any ideas as to what this may be?
|
where did you get the s5 motor, and was it rebuilt before installation? was the oil metering pump working? Did you try a compression check yet? Did you double check the electrical stuff?
|
Re: Car just died, won't start now.
Originally posted by SpeedyRotary Yet another problem for me..ok most of you know I just swapped an S5 turbo into my 88. I started it finally with out any leaks or any signs of a problem. Let it idle for about 10-15 minutes and double check everything and it seemed fine, so I decided to take it for a test drive. As soon as I got down the end of my driveway, my car just died. I thought I stalled it or something so I tried restarting it. All it would do was crank, I thought maybe it flooded for some odd reason so I pulled the EGI fuse and did all that stuff and it still wouldn't start, only cranked. Anyone have any ideas as to what this may be? When I swapped my motors I forgot to plug my oil cooler back in, plug the ground wire in, and there was a big vac leak that caused my car to do die when I would come to a stop, but I guess you're car just died and won't start back up at all? Check plug wires, and all vac lines, fuel lines, intake, wires only thing you can really do... |
No no, I just swaped an s5 TURBO & MANIFOLD into my car :D Same year engine, just streetport engine from Atkins Rotary.. I have check the oil lines and coolant lines and they are fine..I check all the connections and seems ok..could lack of a fluid be the case maybe?
|
NM, looks like I blew a fuse, the EGI comp fuse, where can i get a replacement, and what was the cause of it??
|
All times are GMT -5. The time now is 11:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands