Can anyone ID this short-shifter?
I just picked this up for fairly cheap, and apparently it's out of an fc s4 n/a tranny. All of the hardware works and fits, i'm just curious about the shifter itself; why is the ball so much smaller? It is going into an n/a s4 transmission.
Anyways, can someone ID this shifter? (Right = short shifter, Left = oem shifter) [IMG]http://i1334.photobucket.com/albums/...psfa254eec.jpg[/IMG] |
Looks like the no-name stuff they sell on ebay.
|
Originally Posted by K-Tune
(Post 11557441)
Looks like the no-name stuff they sell on ebay.
|
Don't give up on it yet, some shimming of the bushes could solve the problem.
My "no-name" Ebay kit came with OEM Mazda bushings, so I was confident the parts were OK but like you, I found the operation unacceptable. Using Dykem ( blue machinist dye) I discovered that the ball was not seating into the lower bush, so I went to Ace and found suitable shims in the plumbing gaskets. Took a few tries but the end result is very good. |
Originally Posted by clokker
(Post 11557488)
Don't give up on it yet, some shimming of the bushes could solve the problem.
My "no-name" Ebay kit came with OEM Mazda bushings, so I was confident the parts were OK but like you, I found the operation unacceptable. Using Dykem ( blue machinist dye) I discovered that the ball was not seating into the lower bush, so I went to Ace and found suitable shims in the plumbing gaskets. Took a few tries but the end result is very good. |
All times are GMT -5. The time now is 08:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands