brake booster hose
I'm debating on using heater hose for redoing my brake booster hoses. Ill really have to look at it this weekend and see if I can just completely redo it all without that metal pipe in between.
Oh sorry, I have a s4t2. Anyone else have any better ideas? I really want to do all of it, and not only the one that is cracked |
The hose from the firewall tube to the booster contains the check valve so if you replace it, you'll need a valve of some sort.
I get all my molded hoses from the junkyard. There are an infinite variety, if you look long enough, you'll find exactly what you need. I removed all the tubing/wiring/hoses from my firewall, including the vac booster feed. Unfortunately, there's nothing to show in a picture because hiding it was the whole point. |
Originally Posted by clokker
(Post 11688871)
The hose from the firewall tube to the booster contains the check valve so if you replace it, you'll need a valve of some sort.
I get all my molded hoses from the junkyard. There are an infinite variety, if you look long enough, you'll find exactly what you need. k I removed all the tubing/wiring/hoses from my firewall, including the vac booster feed. Unfortunately, there's nothing to show in a picture because hiding it was the whole point. |
Sure, if it works, a check valve is just a check valve.
|
only consideration is that the hose can't collapse under vacuum...
|
I used a piece of silicone vacuum line from the manifold to the hardline, im sure it would work for the rest of it
|
All times are GMT -5. The time now is 10:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands