RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - BOV connection (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/bov-connection-827985/)

IhartMyFC

03-23-09 12:03 PM

BOV connection

ok im putting on a turbo on my FC. I know how everything is set up but what i never understand is what does the BOV connect to? I know it goes on the intake but the hose. Where does it go to? Thanks.

RotaryRocket88

03-23-09 12:11 PM

It vents air from AFTER the turbo compressor back BEFORE the compressor (turbo inlet duct).

iceblue

03-23-09 01:06 PM

The blow off valve goes on one of the charge pipes. The hose goes to a vacuum line select one that is feed from both rotors. Thats it.

2slow4stock

03-23-09 06:47 PM

Just hook it up anywhere in the intake pipe, before the turbo. Unless your not running the maf then just leave it be.

iceblue

03-23-09 06:51 PM

Quote:

Originally Posted by 2slow4stock (Post 9066903)

Just hook it up anywhere in the intake pipe, before the turbo. Unless your not running the maf then just leave it be.

Thats for recirculating and really makes no difference you can safely vent

All times are GMT -5. The time now is 09:53 PM.