BNR Turbo dyno #'s
 

im just curious as to what dyno #'s you guys have seen with your bnr upgrades? I have a stage 4 and want to see what potential is there. Thanks

Doesn't BNR state something like 365-380ish?

yea around those numbers it what they claim out of a nice tune job i to would like to see whast numbers everyone is putting out i am interested in the stage 4 for my car to

Hey guys.

I had a S4 Stage 4 dyno 402.7 RWHP going from 18 then dropping to 15 psi from 6K to 8K rpm. It dynoed peek power from 6-8K so it had a tremendous powerband. The 402.7 was SAE RWHP and it should make 412-415 corrected. Let me know if you have any questions!

Bryan@BNR
205 640 1193
www.bnrturbos.com

your page isnt working

what number are expected with stage 1 and 2 turbos

hello
 

The page is working for me and I am on AOL! Go to Internet explorer and see if it pulls up for ya.

The stage 1 is rated 290-310 RWHP and the stage 2 is rated up to 335 RWHP at 14 psi.

Bryan@BNR
205 640 1193
www.bnrturbos.com

got it to work but what is the price for the stage 3 and numbers i'm looking to buy a turbo by the end of the month

The previous owner of my turbo (sleeperfc), dyno'd at 247whp at 11psi, running stock-ports, decent exhaust and a TID.

This is on a stage 1.

Turbo II-FB stop thread jacking!!!


and bryan do you have a copy of that dyno sheet by chance? id like to see the curve. thanks

A local friend just got his fc dynoed.. 402 @ rear wheels. running a cosmo w/microtech.. guitar junkie built the eng .. nice power.. BNR is Good!!!

Link: http://www.teamfc3s.org/forum/showth...threadid=44335

Not to bash or anything, but my BNR Stage 3 is having considerable shaft play. No only does the flange move up and down, but in and out. I bought this turbo early 2005

Wow... That is heinous.

Have you called them?

I've talked to them about it before when the shaft play was up and down. They said it was normal. Shaft play in and out didnt happen for quite some time afterwards.

better start throwing rocks at your feet. are you getting any compressor surge?

I want to know the prices for these turbos can anyone help

I'm expecting 350 rwhp @ 17psi on my stage3. Has the necessary fuel mods and a microtech ems. Gets tuned October 9th by Steven Kahn. :) Lets see what kinda of numbers he pulls.

No actually i havnt been.

Heh im just expecting 280 to 300hp with the necessary fuel mods, with chiped ECU, and stock ports.

SEARCH!! Or ask Bryan through a PM? Or go to rx7store.net and look at the prices on there?

Also, if you have questions about the turbo, please do not post about it in someone elses thread, start your own. But really, for a question like this you do not need to start a thread, use common sense.

SEARCH for them Damn!!! and STOP JACKING MY THREAD!!!!!!!!!

brian, do you have dyno sheets, and full mod lists for those dyno numbers? I want to see more then just a peak hp number before i buy a turbo.