block off plates?
i have a 87 tII. i have the egr block off plate. is it absolutely necessary to block off the remainding plates? there is two next to the egr and one close to the firewall. i forgot the names of them. i know one is for the supply coolant for the turbo but i dont have the bac and was thinkin of just blocking off the coolant lines from the top of the motor. i need to get this running asap and am very close to the end. any help would be appreciated
ps. all emissions is removed |
Here are some pics. The only one not pictured is the sub zero start plate which is located on the inside of the LIM
http://i39.photobucket.com/albums/e1...lockoffkit.jpg http://i39.photobucket.com/albums/e1...e/blockoff.jpg This last one is the air supply valve which bypasses air into the dynamic chamber, and is mainly there for power steering and hot start applications. http://i39.photobucket.com/albums/e1...t2manifold.jpg |
here is a larger photo of the BAC, ACV, SAP, and the Coolant to turbo pipe which is removed when you run an aftermarket turbo that does not require coolant.
http://i39.photobucket.com/albums/e1.../sideturbo.jpg |
All times are GMT -5. The time now is 02:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands