RX7Club.com - Mazda RX7 Forum - best way to get some mmo into the housings?

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - best way to get some mmo into the housings? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/best-way-get-some-mmo-into-housings-752103/)

best way to get some mmo into the housings?

how can i get it in the spark plug hole and i also have the power steering and ac so there isint alot of rooom

It may be tough, but it's still easier than a lot of cars to get to the spark plugs on our RX-7's. Reach in, and get to the spark plug. Don't be a pussy afraid of a little cut ;) I've done it a ton of times on cars with PS and AC. Or you could do the other side of the engine. You know... remove the MANIFOLDS and put some oil in that way. ;)

I used some space age technology called a hose and a funnel. Be prepared to break out the encyclopedia for those words, you have probably never heard of them but it works, I swear. It's crazy the funnel is really wide at one end and narrow at the other and it makes it easy to poor stuff. I know I probably lost you by now but just Google the words you don't know and try to follow along. The other part of this contraption is the hose. The hose is like a long flexible pipeline and liquids will flow through one end and out the other side. When you combine the two items it makes this awesome worm hole that transports the MMO from the bottle to the housings. People told me it would never work but I proved them long.

Quote:

Originally Posted by whereiscarmensandiego (Post 8141659)

theres no resaon to be an ass and a prick all at the same time i know how to get it in ther but that dosent seem to work very well as most of it ends up running back out of it....but thanks for your input and plz never respond to a post of mine again

Yes I do need to be an ass, maybe you will learn that you don't need to make a new thread every 5 minutes. You are a noob and contribute nothing to this site, If you even bothered to read the FAQ you wouldn't have made 348 posts about simple stuff that has been covered thousands of times before.

You need to put a wrench on the front crank pulley bolt and rotate the engine when it dripples out.

I'm going to do you and this forum a favor and give you 2 links that will solve every question you could ever ask.

https://www.rx7club.com/search.php

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/frequently-asked-questions-2nd-generation-rx-7-faq-fc-494667/

The information is there, look it up and use it.

Quote:

Originally Posted by whereiscarmensandiego (Post 8140797)

how can i get it in the spark plug hole and i also have the power steering and ac so there isint alot of rooom

Remove the spark plug boot and wire , then remove the spark plug itself. Now you can put the oil in the spark plug hole.

Good luck.

:fingersx:

get a Squirt bottle(like a Ketchup bottle)..put some MMO in,use a Pece of hoes..attach it to the bottle,put the hose into the spark plug hole and Squeeze.