RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Battery Clamp? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/battery-clamp-969510/)

Dunnhopen 09-14-11 11:03 AM

Battery Clamp?
 
What is the piece called the holds the battery into the plastic case? I am in need of it, but knowing what to ask for appears to leave me at a loss. I fabricated something for my old battery, but the new one is a little bit bigger so I would rather just get the stock piece.

MMoore4545 09-14-11 11:08 AM

battery tie down (the piece that goes over the top)
and the J bolts that clamp into it and go into he battery tray.

no affiliation with the website, just providing pictures to make sure I'm clarifying the right thing
Tie down

http://lh4.googleusercontent.com/pub...FVTqp29-RT2x_w

J bolts

http://lh4.googleusercontent.com/pub...e4kPgHb13HP4Zc

HoustonMS3 09-14-11 11:14 AM

On a related note:

Does anyone have a link to a generic decent battery tray/hold down that they have used in the past on these cars? My stock one is basically unusable, and I am looking for something safe to use until I relocate the battery.

MMoore4545 09-14-11 11:22 AM

make a sheemetal battery tray, paint it, and then zip tie the heck out of it if it is going to be temp. I had mine ziptied to the radiator bracket, a bolt hole behind the headlight, and a few other spots I could find, all connected to a ziptie "belt" around/over the battery. I could put all of my weight on it in any direction and not budge it, looked goofy though.. back to the factory battery tray now.

sub 10 dollar fix. battery tray's are expesive if they're just for temp.

HoustonMS3 09-14-11 12:08 PM

Well I have my zip tied all over, and it looks embarrassingly ghetto. There are alot of $20 generic battery trays, too many actually, and that's my problem. I am being OCD and can't pick one. I guess I just need to bite the bullet.

Dunnhopen 09-14-11 12:32 PM

I have the tray, looks like I just need the tie down and j bolts, thanks for the assist. :icon_tup:

Pele 09-14-11 12:46 PM

J-bolts and a tie down are available at most auto parts stores and I've even seen them in Wal*Mart. They should run you only like $15

J-Hooks at Wal*Mart.. Can't find the holder.
http://www.walmart.com/ip/Everstart-...-Bolt/16006678

Here's an all-inclusive kit at Advance, J-Hooks, nuts, and crossbar. $5!
http://shop.advanceautoparts.com/web...A|GRP2005_____


There are a couple different models available to accommodate different sized batteries and different mounting locations.


All times are GMT -5. The time now is 08:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands