AWR motor mounts
 

Anybody running Anthony Woodford Racing Motor mounts...

As far as i can see.. they look like the best design out there.

http://www.awrracing.com/images/awrfcmotormounts.jpg

at 175.. they ain exactly cheap, but, I'm seriously considering trying 'em this winter.

If you do sell me your old ploy's ;)

What's so special about them vs all the others?

If you do sell me your old ploy's ;)

Hello Mr.double!

AWR Makes really nice stuff. We sell a lot of their protege mounts and I have to say they are reaaaallly stiff.

Those look like the only reasonable design I've seen yet, the bushing damps both compressive and tensile loads, unlike the other ghetto mounts people have posted on the forum.

The ghetto mounts consist simply of a bolt going through a cylindrical poly bushing. The problem is the poly bushing only has an effect when it is compressed, under tension the load is all on the bolt with no damping. So if the load goes from compression (squeezing the bushing) to tension (decompressing the bushing) the bolt gets impacted with not only the movement of the engine but even the force of the bushing decompression is assisting with the destruction of the bolt. Stay away from these types of engine mounts.

The AWR mounts look pretty decent, at least the design looks reasonable.

Cell dropped connection heh