awesome buy
 

an '88 for $200.00 delivered with a bad motor of course but the rest of the car is perfect. car sat 2 years never cranked (and no rust garage kept )so i am sure the motor needs to be rebuilt. i had to share this with someone. thanks in advance i am sure i will be asking alot of questions when i start this rebuild. i am very serious and want to make this car as close as possible to when it came off the showroom floor!

Great buy - $200 with a good body, interior. You'll need to post some pics when you get a chance.
Good luck with the rebuild.

Congrats. What model?

B

good for you congrats

i think it is an FC model? it is a sep. month of 87 year i know it is a sport model version 4 if that makes since. i am very new to rotary but will engulf myself into information and hands on soon enough

Congrats on the find! You've discovered a good place to learn, there's a wealth of info herein :)

Read the FAQ at the top of the page for some really good info and links.

welcome to the club.

Nice find! Good luck with the rebuild and please post pics of ur new 7! You came to the right place for RX7 info!

n/a or TII I f its an na its a very good deal, TII Hellable deal. Congrats on your found.

its an n/a model. thanks alot for the warm welcome i can see spending alot of time here.man i am still freakin out over this. is it possible for a twin turbo 20b conversion? any info? tried the search several times but am looking for specific info. again i am not just asking this question just for asking. i am very serious about this if anyone has any info i thank you in advance.

there is a website floating around about a 20b conversion but i remember the price range bein WAY up there i'll try and find it

www.fc3spro.com has a section for engine swaps, just start browsing the forums, and learn all you can.

20b info
 

i believe this is something of the information you want
20b swap info......

-Sean:patriot:

Score! Try the ATF or oil trick in the engine first. You might be suprised (I was, 2 years sitting, fired right up),.

thats what i am talking about 13b-rew twin turbo or 20b twin turbo looks like a big concern on the 20b conv. is the effect it has on suspension. thanks for the sites

Just found the original sales sticker and all info. from everything single thing done to this car since '88.
Car sold for $17170.00 with two options A/C and a sunroof all others are no-charge. Shipping weight of 2625 lbs. just thought it was really nice to find this stuff in the car locked in the storage bin.

Pay attention to Nowhere. It may well be that you do not have a blown engine. How many miles on it? Do several searches on compression, the ATF trick, and starting engines that have sat a while. Begin By preping the engine ( 30Kmaintenance) and assume it was only badly flooded.

A further passing thought. Under no circumstance try to start her if there is stale gas in the tank. Drain the tank, fill with new gas, and replce the fuel filter before trying to start her.

i drained the fuel and replaced the plugs also used the atf in each side held the throttle down and tried to crank it sounded like it wanted to start but nothing.
there are alot of miles187k

should give up and just pull the engine for a rebuild :)

Great find! Its prob. covered in some of those articles posted above, but just doing a swap with a TII engine is a whole lot easeir than swaping in a 13b-REW or 20b. I dont know about the 3rd gen engines, but a 20b swap will run you at least 10k to do it properly. The 13bt is capable of quite a lot of power with the right mods. If you do decide on a 20b swap, more power to you.

200? Nice, there was another guy bought one in Texas for 100. His was 87 NA I think. But good find. I am looking at a FC online for 1800, 91 NA, great condition. Still wondering if I should get it, but it is all the way in Sac. CA.:mad:

Do not hold down the throttle starting it. If you really want a new engine go for it. The fact it wanted to start suggests it way well do so.
Think again about changing the fuel filter. Sitting a long time turns gas to a varnish like goo. Cuts gas flow = no start. Before you rid your self of the engine do your self a big favor and check the comprtession.

thanks for the advice i know these cars are very sensetive and after sitting for some time i should really take the time to check everything out for sure
ie. fuel related components , sensor, solenoids, etc.