auto to manual!!!
i am wondering what i will be needing in order to change my auto to a manual? other than the actual trans... i have heard of a crossmember or brace that goes under it... where and how do i get this?
|
|
:rolleyes:
|
Go into the classifieds section. A lot of guys selling pretty much everything you need. From tranny to differential even pedals and cylinders. For cheap too sometimes.
|
You will also need a clutch master and slave, pedal box, longer tailshaft, manual starter motor, use the speedo sender from the auto and chuck the one that comes with the manual box so it matches the auto diff.
|
And do it correctly. Cut out the auto mounts and weld in the manaul ones, its really not that hard, just don't make some stupid "adapter bracket" off your auto mounts.
|
I say just enjoy the car as is. Most guys never finish the conversion. Its not difficult but it is time consuming and can get hectic.
|
Its really not that bad if your a handy mechanic it can be done on a saturday
All depends on how familiar you are with your car and how good your are with a 12mm and if your interested i have the pedal assembly i can sell you :) |
Originally Posted by nvrdone
(Post 7964592)
And do it correctly. Cut out the auto mounts and weld in the manaul ones, its really not that hard, just don't make some stupid "adapter bracket" off your auto mounts.
|
O yea thats right. Sorry got my wording mixed up.
|
Originally Posted by Latin270
(Post 7964767)
I say just enjoy the car as is. Most guys never finish the conversion. Its not difficult but it is time consuming and can get hectic.
That's probably a good place to start |
I got 5 years on my conversion with no problems with the ghetto mount. i made my mount out of a modified mustang double hump cross member. But should have done the whole mount swap thing. I say if you like you car do the swap it isnt that bad did mine in about 20 hrs of work time. And that was taking my time
|
Originally Posted by rx7fan1903
(Post 7971264)
Man, I say just buy a manual FC, instead of doing complicated conversions LOL! Just kidding. Search the archives for info and look in the "Parts for Sale" section for the parts you need.
That's probably a good place to start |
about how much would it cost (estimate) to convert?
or does it depend on how u get the parts? |
wel i got a tranni for 100 and one for free(the 100 one blew)a clutch from mazda is $183(dont go ebay mazda comes with a warranty),i payed 100 for a 87 to get pedals from just buy new slave,and master cylinder(slave $20,master $30-40,new soft line $10, not sureon the pricve of a hard line.
|
wow, that's pretty cheap!
|
All times are GMT -5. The time now is 02:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands