RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Adding 20w50 to 10w30...? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/adding-20w50-10w30-189897/)

GTIguy 05-25-03 12:42 AM

Adding 20w50 to 10w30...?
 
Just a simple question, If I am too lazy to change the oil can it hurt to add a different weight of oil to the full pan of 10w30? Its almost summer and it seems the oil gets very thin with a lot of driving. Thanks for any input.

poor college student 05-25-03 12:59 AM

good question, i kind of want to know too... and does it matter if you change the brand of oil like when you're just adding b/c ur low and not doing a complete oil change yet...?

and GTIguy, did you end up selling those rims on ebay?

GTIguy 05-25-03 01:22 AM

I dont think it matters what KIND of oil you use its just your preference on what additives they put in.

Yes, I did sell the rims they sold for only $202 :(

poor college student 05-25-03 02:17 AM

if they guy doesn't take them, i might take them off you for 325 shipped (gotta talk to mommy and daddy... b-day is coming up)

GTIguy 05-25-03 02:33 AM

Cool but you would have to give me an answer soon (like the next 2 days) i havent contacted the guy yet. If you have any questions -------- ekmg129@yahoo.com

back to the subject, can the topic stated above be done?

Terrh 05-25-03 08:20 AM

dude, just change the oil!

and rotaries need 20w50 ALL THE TIME, 10w30 is way too thin...

Kenteth 05-25-03 10:44 AM

I've gotten it to the point where I spend more time jacking the car up than unscrewing the drain bolt, changing the filter, and refilling the oil with additives, and dropping the car.
My jack sits about 2.5 inches off the ground, but about 3 at the lever. The jack fits under the frame rail, but not the front engine cross bar thing (whatever crossbar sits aft the radiator and for the oil pan. In any case it either takes two jacks or one jack and one jack stand.

At most ten minutes.

tmiked 05-25-03 10:50 AM

You will wind up with 15W-40 :D

I would try to stick with the same brands and either syn or dino. Other than that mixing should be ok

I have an M3 which requires 10W-60 Castrol Synthetic.
I was out in the boonies very late and my oil warning light came on. I could find no syn oil anywhere. I had to put a quart of dino in :(

I toook it in for a oil cange the next week. Dealer said it should be no problem.

poor college student 05-25-03 02:35 PM

cool, good info guys... gtiguy, i mean, if the guy won the auction, it's his first... if that doesn't go down, then let me know...

Black13B 05-25-03 02:53 PM

oil is oil - it wont really make a difference..

just keep in mind that when you mix weights like that there is no telling (for sure) exactly what you'd call your mixture..

it's fine as long as its temporary, just try to run a straightforward (by this i mean not mixed with a different) weight all the time.. :)

GTIguy 05-25-03 07:51 PM

Thanks for the answers,

poor college student, I will offer it to the high bidder which I am trtying to do right now but the guy doesn't seem to be contacting me which is a big violation at E-bay. Anyway looks like you have a chance at them I will keep you updated and maybe we should starting talking through e-mail or pm. Latta -Evan


All times are GMT -5. The time now is 05:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands