ACT clutch question
 

Blah, I need to order this thing tonight! Anybody know the difference between the ACT Z65 HDMM (Heavy duty modified street clutch) and the ACT Z65 HD00 (street/strip clutch)?

I'm torn between them and I really can't find the difference except for about $20 or so? Also, anybody know where to get a good price on either of them? Thanks a ton!

And I guess nobody cares for the Centerforce II clutch?

From my 1 minute of research I got out that they both hold 330ft/lbs but the hd00 is a street disc and the hdmm is a modified street disc (probably unsprung?). Since they both hold the same tq I would go with the regular street disc (HD00) for comfort and ease of use.

Considering I used an unsprung 6puck from ACT and its my DD. You could use either, I doubt you would really notice a difference.

^ I also use a HD 6 puck unsprung and unsprung clutches tend to chatter when they engage. I don't drive it everyday though so it would probably be something I would get used too. Not a big deal just one of those things that my OCD hates!


awesome sig btw.

just don't use the extreme pressure plate. It is known to break pivot balls.

Right on, thanks for the quick reply guys. I've been looking all night for a not-so-costly street/strip clutch. I found one pretty cheap but it's mislabeled as a clutch for a Protege'. Take a look.

http://www.autocarparts.com/part/918/345/

It's pretty cheap and the number matches what is sold for the 86-92 turbos but it's labeled for a Protege, any ideas or did they just screw up?