RX7Club.com - Mazda RX7 Forum - Accessing EFI harness ground with UIM still on?

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - Accessing EFI harness ground with UIM still on? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/accessing-efi-harness-ground-uim-still-515946/)

Mindspin311

03-05-06 08:54 PM

Accessing EFI harness ground with UIM still on?

Im going to re-do alot of my grounds on Wednesday and Im curious to know if Ill be needing to completely take off my UIM to get the harness ground or if I can save my self the trouble and keep it on.

NZConvertible

03-06-06 01:38 AM

There is no way to get to the main EFI ground on top of the engine without removing the UIM.

Mindspin311

03-06-06 03:21 PM

Bah, well I better muster up the confidence to have faith in myself that I can get it all back together and running.

RotaryEvolution

03-06-06 03:43 PM

blue tape with numbers or markings as to where they go, pull the tape off when you plug each line in, this should make sure everything is back in place properly.

Mindspin311

03-06-06 03:44 PM

Quote:

Originally Posted by Karack

blue tape with numbers or markings as to where they go, pull the tape off when you plug each line in, this should make sure everything is back in place properly.

Didnt even think about that, thanks for reminding me!

NeCr0mStR

03-06-06 05:00 PM

d00d I just took LOTS AND LOTS AND LOTS of photos with the digi cam.

I have 62 pictures just of the tear down of the engine exterior.

They were invaluable when I put it all back together.

All times are GMT -5. The time now is 11:55 PM.