aaarrrghhhhh exhaust studs help!!!
So i have my nice pretty engine sitting in front of me. Freshley rebuilt and painted and now freshley broken =(. Anyways somewhere in transit one of my exhaust manifold studs was broken or just really stressed because when i went to put on my manifold the stud snapped right off. Thinking it would be no big deal, just drill it a little and use an easy out to pull it out, well that didn't work. All it did was tear the hole i drilled in it all up. so now i'm stuck, what to do do i just drill the whole bolt out threads and all in the housing and try to run a heli-coil in it or should i stop where i'm at and try threading it and use some extra washers on a smaller bolt to hold the manifold on or just say the hell with it and attach everything on with 3 bolts and hope it doesn't leak like crazy.
http://f5.putfile.com/6/16500570321-thumb.jpg http://f5.putfile.com/6/16500582715-thumb.jpg |
It'll leak with 3. I'd find the smallest hardest bit you can find and start with that, and then just move up in size from there.
|
All times are GMT -5. The time now is 11:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands