91 n/a fuel pump switch
 

Well I think I found where to snip it and get on with it, but this is just coming too easy.. I was wondering if there is anyone out there that has done this to a similar model. The wire plug is pretty much under the steering wheel, right? Is the wire you splice black with a white stripe?

Thanks,
Zane

The circuit opening relay has a yellow base and a white plug. You're cutting the thick black/white B wire (power from ignition switch), not the thin black/white STA wire (start signal from ignition switch).

https://www.rx7club.com/attachment.p...chmentid=35430

Ok, wire B is the one to snip .. Thanks