88 TII front cover swap??
 

i have a 88 TII going in a Datsun if i get the oil pan from a GSL-SE it will fit between the cross member and steering rack parts. what needs to be done to make it fit. its longer then my stock oil pan. and the front cover from a GSL-SE will fit my TII? i want to do this for motor mounts on the front. so i will just need to make a return line for my oil from the turbo? any other mods, or will it all just fit? i know its been done but i need to know exactly what i need to do and what too buy.

i just put a gsl-se front cover and pan on a 6 port 13b and it went in my fb just fine. I dont know if thats what you were asking but they bolt on s4 and 5 13b's without any other problems

so it just bolted right on? and what about oil line from the turbo you made one?

He said he has a 6 port 13b. 6 port = N/A. So he didnt have to worry about any oil feeds.

Unless he turbo-ed a N/A engine ;)

ya i should rephrase that so i just need to make a oil return line for the turbo? and it will fit?