the 7 might be running soon
 

ok heres hte deal i drive an 87 rx7 se 5 speed / a couple of months ago the drive shaft broke and the tailshaft also broke at the same time well when i installed a new driveshaft and started the car it would stall as soon as i let off the clutch/ well a couple of weeks ago i lowed the trannyy and a friend of mine installed a new tailshaft for me when we tried to take it out of gear it wouldnt budge/ so yesterday i bolted the tranny back up and installed the driveshaft / and started the car and i didnt stall so im thinking its fixed/ well i forgot to put in the pin that hooks up to the gear rod that connects to the square piece thats sits inside the shifter housing/ which controls the shifting/ i was wondering if its fixed what type of tranny fluid do i need and how do i add gear oil / whats brands work best for the 7/ thanks again for any future help/

red1rx7

i need help soon or the 7 goes to t he junk yard

if you get under there, look on the biggest part of the tranny, about 4 inches in front of the bell housing, there will be a plug high, and a plug low. they have square tops. the upper one is fill.

Run a long hose from that up to the engine bay, put the end of your containers in it and squeeze. should take about 4 litres.
when it starts to come out of hole your filling it in, its full