3 Rotor
 

how much would a 3 rotor cost that is just the motor no harness no turbo

$4000usd if you can find one. that is with the turbo. you won't find one without it.

and who are you ???

well i found one the guy has it with out the turbo
he sold the turbo
he only has the motor and he says its runnin i am thinkin of bYIN IT
by the way hes wants 500 US for it frendly hook up .
its a performance shop in seattle

he only has the motor no harness or tranny just the motor with intake and exh manifold oh ya and the fan on it

buy it!! hey are you on "bcrx7.com"?

ya why??

does it sound too good to be true?

i saw it today it had no turbo he sold it and he says it runs he'll give me warrenty too

just checkin :)

why did u ask
is there a problem
i know uve probably read the post at for sale ya i have prob with bryan

and how much more did you expect to pay to get one running??....

pay for ????

you cant even get a jspec 13BT for 500...let alone a 20B? id be pretty wary of something like that. you get what you pay for.

If anything, a cool doorstop.

u gusy dont know these ppl
even if the motor isnt runnin i can still rebuild it so ya
i'll post pics and show u guys that it is a 20B and I got hooked up

I will not run by itself, nor will it magically jump into your car. Assuming you want to run it in your car without the turbos, you will also need to buy and install an aftermarket EMS, additional or aftermarket ignition system (for a V-6), modified or aftermarket V-6 tachometer, aftermarket fuel pump, K2RD or custom engine mounts, custom headers, custom intake for the throttle body, custom spacer for the transmission, custom front sway bar for oil pan clearance, modied TII hood for engine clearance, modified or replaced 20B thermostat housing for clearance, change out the flex plate for a flywheel, etc.

http://www.se-rx7.com/20b/

http://fc3s-pro.com/TECH/20B/20b.html

i know that i have reab bout the 20B it iwll cost me some money but these guys can find the parts from japane hella cheap, and help me install it
i know already found 20b motor mounts for 200 shipped

There's no need to go to japane. We have certain bars in San Francisco, USA, where you can get the same thing that you are getting from those guys, but for free. :boink:

well u probably have better hook up then me so
ya i guess i went to K2Rd they want like 450 for mounts
so i think i got a good deal

eh

what
eh what
i live in seattle fool
i used to work in vancouver i aint no canadian
damn

:crackup:

Ha, just give me your money and I'll drop you off at one of those bars. :bootyshak

Try this with your hook-up "buddies": Don't give them any money now, but tell them to build the car, and then you will give them $700 USD for it once it is running ($500 for the engine + $200 for the japane engine mounts). That shouldn't be a problem since they are your friends, and are so willing to help you with the project, right?


Registered: May 2002
Location: North Vancouver,BC
Posts: 15

OK, so you live in Seattle Fool. So I guess that North Vancouver, BC, is a city in Seattle Fool? Also, how far away is it from Japane?

No thanks, I already have a 20B, and I'm doing everything I can to keep the rear end from getting loose, LOL.

I'm aware of your 20b, I'll take that instead of your money. I was refering to the knob who needs one.
:whipit: