12's?
 

Hey Iam new to the rotary thing and am thinking of buying an 87 13B motor RX-7.
What kind of mod's would it take to get it to the low 13's /high 12's in the 1/4 mile. Also how much would i expect to pay to do this.
Thanks

To get to low 13's high 12's id say the major things your going to need is:
A TII, 3" open exaust all the way back, fuel cut defensor, Fuel controller or stand alone ECU, larger injectors, larger fuel pump, an FMIC, All accesories taken off the engine, power pulleys, and less weight.
The key is which turbo you go with. At the very least if you had to stay stock youd wanna start with a series 5 (89-91 rx7's) turbo and focus on how much fuel your getting in there.
Oh and as far as money is concerned id say 5k would get you there, if you know the right places to get this stuff.

if it is an n/a you are looking to spend alot, but spare no expence and you will have one bad ass ride, (and fast too)

Let me direct your attention to the upper right hand portion of your screen. There you will find the answer to all your questions prayers and curiousity :). Search, Search, Search. There are hundreds of modifications that can be made to these cars. First step is to get a full tune-up and to get the car running at least stock. For high 12's and low 13's you are better off getting yourself a nice TII and starting there. Going turbo on N/a's is kind of not as cost effective as starting with what you will end up with for half the cost. For those numbers though I would go with all the things listed in my post below. "Doing it right. What do you guys think?" Those are the mods that will need to be done most likely. That and the biggest aid in a 1/4 mile time will be driver experience and skill. That can add or subtract whole seconds.

Quick List:

Engine Management System
Free-up the Intake/Exhaust
Front Mount Intercooler
Fuel upgrades: injectors pump etc.
Clutch
after-market Radiator
Drag Radials (optional)
E-Fan
Battery Relocation (to free up some space)
Upgraded Turbo
Nice new Flywheel
these are just some of many things people do to these cars.

There are many ways to cheat and get a 13 second '7 but you better be ready to ride the bus in the near future. Do it right the first time and you will thank yourself in the end.

I would definitely do a full tune-up first though and get all your other bugs worked out. Compression test the motor and see if a rebuild is going to be necessary.

--Fritz

Yup thats KEY and thats to have a good foundation to start from and that means making sure you have a well running Rx7 before you go all out and make it a Rotary Rocket :bigthumb:

600-1500 FMIC
100 Battery Relocation Kit
200-450 new Injectors
300-1000 Exhaust
100-250 Intake
800-2000 EMS (skip the SAFC if you are going for these numbers)
0-1800 if rebuild is necessary
80-140 full tune up
200-500 Aftermarket Rad
700-1400 Turbo
20 Oil Change
150-500 Clutch
180-300 E-Fan
200-400 Guages

3480 --- 9860$

This is just off the top of my head, and this is if you are doing all of the labor yourself this is just for parts basically.

Guys with less expensive set-ups I know it can be done so please don't flame me! There are plenty of ways to get lower numbers if you can be a DIY fanatic, find competitive prices etc., but just buying stuff off the internet I think these are some pretty realistic figures.

--Fritz

Lots of NOS!!!!!j/k

You all have forgot one of the keyest parts: Bridgeport. (Assuming this will not be your daily driver)

WHAT?!?!

These are some of the biggest crackpot answers I have ever heard!

I bagged 13.4 at 3000 ft above sea level, with TMIC, Stock ECU with an SAFC, an S5 turbo, and exhaust. And I could have been faster if I opted to speed shift..

Ask the people that have the slips, not the keyboard racers...

Mod list (so people dont bitch):

K2RD Rad
E-Fan
680 primaries, 720 secondaries
SAFC
3 inch Thunderfab DP/MP
RB catback
FCD
S5 Turbo
Stock motor (not ported)
A cheap ass $30 pair of junkyard rear radials (street)

Read it and weep..

https://www.rx7club.com/forum/attach...postid=2827013

Nice launch!

He said low 13's to high 12's. Id say your in that category with less mods than i mentioned. You basically have upgraded your fuel system, cooling system and exaust system and your in the low 13 second category. So what would it take to get a little more below that? Upgrading the IC, perhaps more fuel and ugrading your turbo... I am incorrect in my assumption???

port the motor !

thats what im saying u don't need half of that stuff to go 13s i gotten my car in the 11s on a remapped ecu and a upgrade turbo with a front mount and 850cc with msd. all my friends running a s5 turbo with full exchausst are in the low 13s on a stock ecu with no safc and 720 secondaries, one of the 7s we have is running a 13.60 on stock everything but exchaust and fcd don't ask me why because i warned him and he doesn't care he says thats how they do it from the south. so it is possiable to go 13s cheap

Re: 12's?
 

Hey buddy get off my nuts . Ive got an 87 GN and a 87 GXL. After driving the buick for a while I gave up making the Rx7 fast. Got any mods done to your GN? :D

I ran 13.5 in my old Turbo GXL on plain street tires

you can search for a post I had "worlds fastest least mod'd FC" :D

stock IC
stock Injectors
stock FP
stock fuel lines
stock fuel rails
stock ECU
stock S4 turbo 10PSI
stock TID/AFM
stock BOV
no wieght reduction other then no A/C

The only real external mod I had was a 3" exhuast

I'm sure If I could of pegged a 1.8-1.7 60' foot
with some drag radials I might of run low 13's to high
12's

for a N/A:

have the motor street ported
get a Jay-Tech Holly manifold
get a FPR
Holly 600 double pumper
ACT clutch
Sniper N.O.S kit 75 shot
Drag Radials

should have no problems running 12's

well, I have the new turbo on the way, and bigger injectors. I am insane, I think low 12s is possible on the stock IC (with some sort of cooling IE water, etc..)

thank you!

Get the Seven guy!

yaive a hotwired walbro 340, 2.5inDownpipe, 2.5in exaust, TA-49, ATR Headers and a thrasher chip.and some other little stuff.hoping for some mid to low 12's with that stuff on DR's and 25 psi.
Just got interested in the rotary thing and wanted to know how well the respond to bolt ons

Now Im scared, we have pretty much the same setup, except Im running a TE44 & 3in THDP. As for the RX7 and bolt ons: intake, header, no cats and the car will do much better than stock, but don't expect for it to be too quick.