Shaved fc!
2 Attachment(s)
I shaved my fc. It does have a sbc and I'm sure I will get some hate but I have never seen a shaved rx7 and thought I would share.
|
I barf'd :[
|
There are a few out there, mine will be one of them before too long. When done nice and smooth I like the shaved look better than any trim I've seen on them.
|
I see you shaved it good,but there is still a big Zit on the hood!.Can you cut that with your Razor too?..(Messin with ya,to each their own.)
|
Originally Posted by K-Tune
(Post 11173384)
I barf'd :[
Shaved FCs look *&#ed up, and the V8 ruined the car. [disclaimer: I'm in a bad mood, ATM] |
Shaved fcs looks pretty dook, but hey if you like it it's good
|
Opinions are opinions but a fact is this has gotten me some pretty cool side work lol
|
Not my style, but I admire the work that went into it. Do you have a plan for the front turn signals?
|
That ain't no RX-7...
|
Turn signals are inside the flash to pass housing. I don't have them wired yet :)
|
When I finish my tails I will post pics of the exterior lights.
|
I actually have no problem with the shaved look. Essentially, eliminating the side molding look is generally a current look for todays japanese imports. That's great if you want to bland out the distinctive look of an RX7 so it looks more like every Japanese import. Moving the turn signals the the FTP's is actually kind of clever. But until you paint it all the same color, kind of hard to truely appreciate.
What I have a BIG problem with is that ugly oxymoron thing sticking out of the hood, and what it stands for. But given my signature, that shouldn't surprise anyone. |
The main reason the whole fiberglass thing started was due to the huge turn signals and marker lights. Didn't like them and it just went from there as far as the swap that's a long story
|
don't really like the two tone, but good job none the less.. at least some people around here like to look "different"
|
here is my old na with offset fail. had shaved handles, side markers, antenna, w/s squirters, hatch lock and 3rd brakelight. looked ok. but i wont do it again. it was during my minitruckin days lol.
http://img15.imageshack.us/img15/973/s6300774.jpg http://img26.imageshack.us/img26/410/s6300766.jpg |
|
Originally Posted by sodrifter
(Post 11174542)
here is my old na with offset fail. had shaved handles, side markers, antenna, w/s squirters, hatch lock and 3rd brakelight. looked ok. but i wont do it again. it was during my minitruckin days lol.
http://img15.imageshack.us/img15/973/s6300774.jpg http://img26.imageshack.us/img26/410/s6300766.jpg |
|
Originally Posted by sodrifter
ya. that has become my parts truck for this one
|
love what you did here i want to do something similar once i get my car back from the shop do you have any tips for shaving the front and rear bumpers i never done any fiberglass work before
|
1 Attachment(s)
|
Shaved?
|
Originally Posted by thethingthatshouldnotbe
(Post 11570758)
|
I have now decided I must find one of those rotary trucks
|
If it ain't rotary it just don't belong.:shocking::shocking:
|
All times are GMT -5. The time now is 05:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands