RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)
-   -   RX-7 Turbo II T-Shirt Design (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/rx-7-turbo-ii-t-shirt-design-1078997/)

2020printworks 02-19-15 07:24 PM

RX-7 Turbo II T-Shirt Design
 
1 Attachment(s)
I design shirts and do screen printing for a living. I just wanted to post this one here and get some feedback. I've have two second gen RX-7's and they were both awesome. The first one I had was just a base model when I was 17 and the second one was a blue convertible with a black top. I actually sold it for $700 bucks because it started running bad and I needed a reliable car for college. Still kicking myself for that one! Any opinions good or bad are appreciated.

thanks,

Chris

welfare 02-20-15 08:42 AM

personally, i think that would look better on the back, with a smaller insignia at the front left chest. also not a huge fan of the font. just my .02$

2020printworks 02-20-15 05:54 PM


Originally Posted by welfare (Post 11873625)
personally, i think that would look better on the back, with a smaller insignia at the front left chest. also not a huge fan of the font. just my .02$

I like the idea of putting it on the back. I actually prefer that on my shirts also.

hbtl300 02-21-15 12:50 AM

Ill take one with the pic on the back and insignia on the front left as well

2020printworks 02-21-15 08:38 AM

2 Attachment(s)

Originally Posted by hbtl300 (Post 11874050)
Ill take one with the pic on the back and insignia on the front left as well

I'm not sure what to do for the front yet. I was going to work up some ideas in the next few days. Did you just want the same design that's on the back only smaller? I was thinking of just doing a rotor for the front insignia. What do you think? I have two differnt rotors that I drew. They're sorta the same actually. One has the housing and one is just the rotor.

misterstyx69 02-21-15 09:11 AM

NOTE:

Before this Thread gets SHUT DOWN,..IF you Plan to SELL these T-shirts ON the RX7Club you must apply for VENDOR STATUS.
You can do that by contacting Internet Brands Automotive at the bottom of the Home page.

The reason it is NOT being shut down is you have not said you are Selling them.
At the First Sign of that,This thread will Disappear!..(fair enough??)
So,it's best to take note.
Thanks STYX (MOD@RX7CLUB)

* I also see you are NEW and most likely have skipped the Important Rules,so Please take your time to read them.They are located at the top of the New Member's INTRO Section.

2020printworks 02-21-15 02:11 PM


Originally Posted by misterstyx69 (Post 11874124)
NOTE:

Before this Thread gets SHUT DOWN,..IF you Plan to SELL these T-shirts ON the RX7Club you must apply for VENDOR STATUS.
You can do that by contacting Internet Brands Automotive at the bottom of the Home page.

The reason it is NOT being shut down is you have not said you are Selling them.
At the First Sign of that,This thread will Disappear!..(fair enough??)
So,it's best to take note.
Thanks STYX (MOD@RX7CLUB)

* I also see you are NEW and most likely have skipped the Important Rules,so Please take your time to read them.They are located at the top of the New Member's INTRO Section.

I am selling this shirt but not here. Just want feedback. I did a similar design for a jeep comanche and posting it to they're forum helped me refine it a lot. Sorry I should have probably asked first.

lduley 02-21-15 06:33 PM


Originally Posted by 2020printworks (Post 11874246)

I am selling this shirt but not here. Just want feedback. I did a similar design for a jeep comanche and posting it to they're forum helped me refine it a lot. Sorry I should have probably asked first.

Yes but since your not selling it on this forum, you should be in the clear

But, what he said also applies to links to websites just fyi

MaczPayne 03-02-15 02:54 PM

jeep comanche? I want to see! I have the truck :)

2020printworks 03-14-15 11:17 AM

1 Attachment(s)

Originally Posted by MaczPayne (Post 11878564)
jeep comanche? I want to see! I have the truck :)

Sorry it took so long to respond. Here's a pic of the Comanche design. I wish I still had mine but the frame was shot.

91RichmondHill'sWhiteCometFC3S 08-25-16 10:59 PM

Hey do you know whether that t shirt is still for sale? Or whether some people in Canada sell RX-7 FC3S t shirts ? I wanna buy one but not sure where to start looking :( the FC I wanted to buy was bought the day before I had the money ready...founding it got crushed for scrap metal and parts...been searching for a cheap one here in Toronto since.



Originally Posted by 2020printworks (Post 11873413)
I design shirts and do screen printing for a living. I just wanted to post this one here and get some feedback. I've have two second gen RX-7's and they were both awesome. The first one I had was just a base model when I was 17 and the second one was a blue convertible with a black top. I actually sold it for $700 bucks because it started running bad and I needed a reliable car for college. Still kicking myself for that one! Any opinions good or bad are appreciated.

thanks,

Chris


misterstyx69 08-25-16 11:15 PM

Talk with RXeckless (Rick) in the CDN side.
He made T-shirts for Deals Gap and a couple for the various meets.
Maybe he has one left over.

Vania Marrero 06-27-20 05:27 PM


Originally Posted by 2020printworks (Post 11873413)
I design shirts and do screen printing for a living. I just wanted to post this one here and get some feedback. I've have two second gen RX-7's and they were both awesome. The first one I had was just a base model when I was 17 and the second one was a blue convertible with a black top. I actually sold it for $700 bucks because it started running bad and I needed a reliable car for college. Still kicking myself for that one! Any opinions good or bad are appreciated.

thanks,

Chris

I think those shirts are great. I take 5 if your making more let me know vanyfamily@aol.com is my email


All times are GMT -5. The time now is 10:20 PM.


© 2024 MH Sub I, LLC dba Internet Brands