Post pics of your project cars
well everytime i work on my car i get stressed out on how much work i need to do to the interior, so i created this thread to make me and others feel better for seeing someone else whos car need more work then mine
makes people think man im glad that isnt my car and also post pics of inspiration cars too that you guys look at to make want to work on your car |
there is a thread here somewhere of years and years of collective threads of peoples projects and pictures and stories. I think there is one for each generation. I believe ours is under the non tech and pictures part of the 2nd gen section.
|
a wise man once told me "you know why you never see build threads on rx7club.com? because all of them are builds"
|
Engine and tranny are not in the car, driveshaft, turbo, manifold, and a few electrics are missing and half of the injector plugs need to be replaced. That help?
http://i113.photobucket.com/albums/n...1/IMG00523.jpg |
Here is a sneak peak as to what I've been stirring up. A little birdy tells me the new set up will dip into the 600hp range.
http://i106.photobucket.com/albums/m...r/100_7715.jpg |
3 Attachment(s)
Here are a couple pics of my new project. It's in the tear down phase right now.
|
4 Attachment(s)
its not an rx7 but i think its worthy... after i finish the mounts for the TII
|
^Ooooh. Can't wait to see this one finished.
|
Here is mine you guys have probably seen it but i wanted to share it on the thread
Here is what ive done or have added: Engine rebuilt and ported. T-66 dual ball bearing Turbocharger custom made cast manifold 46mm wastegate FMIC with 2.5" piping profec B boost controller LC-1 wideband 02 sensor Haltech E6S 720/1600 Injectors Koyo Radiator silicone radiator hoses 3" free flow dual exhaust with apexi pipes Aeromotive A1000 fuel pressure regulator braided fuel lines (-6 size) Pineaple Racing Oil pressure regulator Mod mazdatrix silicone vaccum lines autometer boost gauge 9mm Spark plug cables walbro 255 fuel pump ACT Street lite flywheel ACT Max Extreme clutch kit new alternator with dual belt pulley 3 MSD 6AL's here is what it looked like when I first got it. http://i283.photobucket.com/albums/k...misPics106.jpg http://i283.photobucket.com/albums/k...misPics107.jpg http://i283.photobucket.com/albums/k...cing/RX7-2.jpg and the engine http://i283.photobucket.com/albums/k...g/100_0771.jpg http://i283.photobucket.com/albums/k...g/100_0772.jpg some TLC!!!! http://i283.photobucket.com/albums/k...misPics110.jpg and I got this!!! http://i283.photobucket.com/albums/k...e145ec183f.jpg then got the S5 Tails and a spoiler http://i283.photobucket.com/albums/k...g/panchito.jpg then decided to get another engine and start a rebuild for just in case, here is what it all looked like after disasembling it, cleaning and painting it. http://i283.photobucket.com/albums/k...ngine004-1.jpg http://i283.photobucket.com/albums/k.../engine005.jpg |
then took the original engine out and swapped it out to another body I had to get it running and that way i could make some money to continue the project.
after that we got this http://i283.photobucket.com/albums/k...ginebay001.jpg http://i283.photobucket.com/albums/k...ginebay002.jpg http://i283.photobucket.com/albums/k...ginebay003.jpg http://i283.photobucket.com/albums/k...ginebay004.jpg http://i283.photobucket.com/albums/k...ginebay005.jpg http://i283.photobucket.com/albums/k...ginebay006.jpg http://i283.photobucket.com/albums/k...ginebay007.jpg then added the 3 MSD's http://i283.photobucket.com/albums/k...ginebay010.jpg http://i283.photobucket.com/albums/k...ginebay009.jpg here is the video of the first startup. sorry but the camera man was late on starting the recording. http://s283.photobucket.com/albums/k...chostartup.flv i already got the radiator fan shroud on it. right now the car needs the haltech to be tuned for it to be driveable. Ive taken it arround the block a couple of times but Im being really careful with it still. |
Originally Posted by iani1.1
(Post 8603107)
its not an rx7 but i think its worthy... after i finish the mounts for the TII
|
Originally Posted by Saavedro88
(Post 8603192)
My projects:
Felicity: Needs a fuel pump and coolant seals/rebuild. http://i261.photobucket.com/albums/i...8/DSC_0112.jpg Belia Darzu/Darth Talon: (I haven't been able to decide on the name yet...) Needs coolant seals/rebuild. http://i261.photobucket.com/albums/i...8/DSC_0014.jpg The Pile: (Haven't had time to think of a name yet, lol...) I just got this one last night, it doesn't run and I haven't had a chance to find out why yet. http://i261.photobucket.com/albums/i...8/DSC_0098.jpg So between the three I should be able to come up with at least one that runs sometime soon eh?? |
some people need to clean their car..hehe
|
My Daily/Project :)
I know all are in my yard I gotta go on a Photo shoot one day. All comments welcome Postive & Negative.
http://a199.ac-images.myspacecdn.com...a58af2340e.jpg http://a714.ac-images.myspacecdn.com...a7d1841a59.jpg http://a574.ac-images.myspacecdn.com...c70a0076cd.jpg http://a391.ac-images.myspacecdn.com...abe2d564be.jpg Trini |
Heres a cool thread with before and after pic of projects.
https://www.rx7club.com/2nd-generation-non-technical-pictures-198/before-after-pics-your-fc-739363/page2/ http://img527.imageshack.us/img527/5903/dsc00599ai5.jpg http://img116.imageshack.us/img116/1643/dickck1.jpg http://img262.imageshack.us/img262/4...979copyzi1.jpg |
Originally Posted by need RX7
(Post 8603226)
Sweet!! Do you have a build up thread anywhere?
|
man this thread was suppose to make me feel better by seeing other cars that needed more work than mine but damn i am jealous of some
espeacially slammedblk that car is sick |
Originally Posted by iani1.1
(Post 8603107)
its not an rx7 but i think its worthy... after i finish the mounts for the TII
so your car is more than worthy and that will be a sick car gl with the build |
polito racing, nice job that engine look great
|
thanks
|
welp here progress of my 7 :)
street ported s4 13bt with ceramic coated rotors 3mm apex seals,race bearings dynamic balanced, Turbonetics 62-1 turbo cog belt, ported intake manifold and throttle body custom apexi IC and tubing custom header with twin Tial wastegates custom 3" stainless exhaust into apexi duel n1's 720cc primary injectors 1680cc secondaries with custom rails -10 fuel lines with all Aeromotive fuel pump regulator and filters Haltech e6k Yonaka FMIC 26''x12''x3'' and just recently Tuned by BDC Motorsports http://i191.photobucket.com/albums/z...irstbought.jpg http://i191.photobucket.com/albums/z...25-06_2134.jpg http://i191.photobucket.com/albums/z...everywhere.jpg http://i191.photobucket.com/albums/z...t4near030p.jpg http://i191.photobucket.com/albums/z.../DSC01487t.jpg http://i191.photobucket.com/albums/z...nk87/R7005.jpg http://i191.photobucket.com/albums/z...7/DSC01901.jpg http://i191.photobucket.com/albums/z...ct4near008.jpg http://i191.photobucket.com/albums/z...nk87/Ku025.jpg http://i191.photobucket.com/albums/z...7/DSC00809.jpg http://i191.photobucket.com/albums/z...7/DSC00696.jpg |
Originally Posted by NO PISTONS
(Post 8605598)
man this thread was suppose to make me feel better by seeing other cars that needed more work than mine but damn i am jealous of some
espeacially slammedblk that car is sick Here is a few more pictures. OEM bumper cut out and paint matched. Im in the process of straightening my IC pipes up front. I cant figure out what lip I want up front though. http://i106.photobucket.com/albums/m...r/100_7708.jpg Headlight covers also paint matched,new windshield coming...Im just too lazy to install my new one. http://i106.photobucket.com/albums/m...r/100_7712.jpg That is all for now |
http://i79.photobucket.com/albums/j1...s/DSC06465.jpg
http://i79.photobucket.com/albums/j1...s/DSC06507.jpg Will be in the 500hp club come spring. |
I like your choice of mods. That is very nice!
Originally Posted by Mazdapunk87
(Post 8605728)
welp here progress of my 7 :)
street ported s4 13bt with ceramic coated rotors 3mm apex seals,race bearings dynamic balanced, Turbonetics 62-1 turbo cog belt, ported intake manifold and throttle body custom apexi IC and tubing custom header with twin Tial wastegates custom 3" stainless exhaust into apexi duel n1's 720cc primary injectors 1680cc secondaries with custom rails -10 fuel lines with all Aeromotive fuel pump regulator and filters Haltech e6k Yonaka FMIC 26''x12''x3'' and just recently Tuned by BDC Motorsports |
All times are GMT -5. The time now is 04:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands