|
Originally Posted by caeya
(Post 12109973)
15x8 +6 and 16x8 0 would fit fine on stock fenders. 15x8 -19 would need the fender lip rolled and possibly a bit of a pull.
This is my old car with 16x8 0 on stock fenders for reference |
Originally Posted by marty_martyrdom
(Post 12110121)
That looks really good! What size tires were you running? Any spacers or anything like that?
|
2 Attachment(s)
Don't know if you can see it.
Old pics of Mustang Bullit wheels..on an FC. They fit rather nicely.They are the older version..38 offset 17x8's. |
My setup
|
17x10.5 and 275s all around.
https://cimg9.ibsrv.net/gimg/www.rx7...1a59f665b7.jpg https://cimg0.ibsrv.net/gimg/www.rx7...977af90b00.jpg |
Originally Posted by misterstyx69
(Post 12111796)
Don't know if you can see it.
Old pics of Mustang Bullit wheels..on an FC. They fit rather nicely.They are the older version..38 offset 17x8's. Might have answered my question. Im looking at a set of Ruff Racing R350 in 18x8 38et Im running ebay lowering struts and cut coils in the front. Will a 18X8 38 fit in there without hitting the strut? I don't know my current setup but I measured my wheels and tires that are on the car now (16x7or7.5? borbet with 195x40r16) I have an effective 20mm offset from what my tape measure tells me. That includes the spacers. I have about 1.5" between the tire and the strut. When I do the math I should have about 1/4" between the wheel and strut with the new wheels. Does that math figure up? I could always run a 5mm spacer to. Current setup. https://cimg9.ibsrv.net/gimg/www.rx7...e0a0ade5eb.jpg |
Will racing beat springs/agx shocks rubb against 17x7.5 front 17x9 rear
2 Attachment(s)
Hi guys,
I was wandering if anyone have experience with racing beat springs/agx shocks on 17x7.5 35 offset front/17x9 35 offset rear. Tires are 215/45R17 front, rear 245/40R17. Will my wheels rub against the springs? Any help would be appreciative. Thanks |
What wheels are on this car they are awesome ! There not esr sr08 !
2 Attachment(s)
need to have deep center anyone ?
|
figured it out !
Originally Posted by lethal28
(Post 12135849)
need to have deep center anyone ?
|
|
Konig Hypergrams
3 Attachment(s)
Hey Everyone,
I wanted a lightweight, but affordable wheel and this was a great option: The new Konig Hypergram. Got them from discount tire direct for $176/wheel. However, I think they're sold out right now because I double checked the site and they're gone. Great deal for a lightweight wheel if you can find them (~17.5lbs/wheel). FR: 17x9, +25mm offset, 235/45/17 tire, +20mm wide front fenders RR: 17x9, -5mm effective offset (installed 30mm spacer on +25mm wheel), 235/45/17 tire, +30mm wide rear over fenders This setup could be run on a stock body with a fender pull front and rear without the huge rear spacer of course, that's only to match the over fenders I have. I have Fortune Auto coilovers so I can't confirm clearance to any other suspension types. Attachment 604538 Attachment 604539 Attachment 604540 |
how would 18x9.5 18x10.5 +7 fit? possible with stock metal or is it mandatory for something that aggressive? if i go 30mm fenders front and back would it make it a better fit?
|
Originally Posted by boostinfc3s
(Post 12171341)
how would 18x9.5 18x10.5 +7 fit? possible with stock metal or is it mandatory for something that aggressive? if i go 30mm fenders front and back would it make it a better fit?
|
Found a cool pair of wheels for sale for cheap. 17x9.5 +31. Would that fit, either front or rear? Stock fenders, stock suspension + lowering springs.
|
Originally Posted by Rotary_Knight
(Post 12167194)
Hey Everyone,
I wanted a lightweight, but affordable wheel and this was a great option: The new Konig Hypergram. Got them from discount tire direct for $176/wheel. However, I think they're sold out right now because I double checked the site and they're gone. Great deal for a lightweight wheel if you can find them (~17.5lbs/wheel). FR: 17x9, +25mm offset, 235/45/17 tire, +20mm wide front fenders RR: 17x9, -5mm effective offset (installed 30mm spacer on +25mm wheel), 235/45/17 tire, +30mm wide rear over fenders This setup could be run on a stock body with a fender pull front and rear without the huge rear spacer of course, that's only to match the over fenders I have. I have Fortune Auto coilovers so I can't confirm clearance to any other suspension types. https://i65.photobucket.com/albums/h...psqfc4trwf.jpg https://i65.photobucket.com/albums/h...psds53f3ec.jpg https://i65.photobucket.com/albums/h...psr0ikmh2h.jpg |
Got my Weds Cerberus 2 built.
18x8.5 FR with 25mm spacer about et15 18x10 rear no spacer, et 18 https://cimg4.ibsrv.net/gimg/www.rx7...3ec1a6e921.jpg https://cimg9.ibsrv.net/gimg/www.rx7...5e9311037d.jpg https://cimg8.ibsrv.net/gimg/www.rx7...1890b526d3.jpg |
Ill keep whoring my other wheels too.
Drift spares. Prodrives 18x10.5 et20 245/40 I love these wheels but I wish I had 2 more. Sorry for the dusty car pictures. https://cimg4.ibsrv.net/gimg/www.rx7...75f6cad805.jpg https://cimg9.ibsrv.net/gimg/www.rx7...d84fcb4023.jpg https://cimg5.ibsrv.net/gimg/www.rx7...c16a962b96.jpg |
Originally Posted by Mark Boss
(Post 12117631)
|
Originally Posted by badtzlotus
(Post 11186014)
:nod::icon_tup:
|
Originally Posted by Hypertek
(Post 10974862)
I'd love to see this car a little bit lower.
|
Originally Posted by LargeOrangeFont
(Post 12117673)
17x10.5 and 275s all around.
https://cimg9.ibsrv.net/gimg/www.rx7...1a59f665b7.jpg https://cimg0.ibsrv.net/gimg/www.rx7...977af90b00.jpg |
+27, needs spacers up front.
|
2 Attachment(s)
17x8.5 +32 with 3 mm spacers all around
245/40 Nexen Sur4G's, which are very wide for 245's Ground Control's complete Coil Over package 2.7* negative front camber. |
What size over fender are you running up front ?
Originally Posted by RussTII
(Post 8864555)
F 18x9.5 +17 (3mm spacer to clear coilover)
R 18x9.5 +20 245/2018 all around (wheels came off a GT-R, so that why there arent staggered) https://i13.photobucket.com/albums/a...7/DSC04112.jpg https://i13.photobucket.com/albums/a...7/DSC04113.jpg https://i13.photobucket.com/albums/a...7/DSC04114.jpg 18x9+5 18x10+4 https://i13.photobucket.com/albums/a...7/DSC03835.jpg https://i13.photobucket.com/albums/a...7/100_0228.jpg https://i13.photobucket.com/albums/a...7/100_0305.jpg https://i13.photobucket.com/albums/a...7/100_0310.jpg |
Anyone running a 17x 8 +38 and 17x9 +38? Found some LMs but not sure if the fronts will work.
|
1 Attachment(s)
Will a 16x9+17 rear and a 16x8+15 front fit a stock vert ?
im kind of digging these |
Originally Posted by PnoyRx7
(Post 12255976)
Will a 16x9+17 rear and a 16x8+15 front fit a stock vert ?
im kind of digging these https://farm5.staticflickr.com/4535/...bf6e2d3e_c.jpg |
Work Meisters 18x9.5 square
4 Attachment(s)
Yay or nay
|
Originally Posted by PnoyRx7
(Post 12255976)
Will a 16x9+17 rear and a 16x8+15 front fit a stock vert ?
im kind of digging these I run 17x9 +15 215/40 all the way around with just a roll on the front fenders |
Originally Posted by cosmo7
(Post 10965528)
|
|
Now those are nice rims!
|
18x9's & 18x10's Work Meister with 25mm wheel spacers
Originally Posted by PlatinumPresto.info
(Post 7443065)
f- 16x8 +30 Japanese 2piece Hero's racing, 20mm over fenders
r- 16x8 -15 Japanese 2piece Demon cambers, ??mm over fenders(forgot) https://i166.photobucket.com/albums/...19-07_1604.jpg https://i166.photobucket.com/albums/...21-07_1711.jpg https://i166.photobucket.com/albums/...21-07_1708.jpg https://i166.photobucket.com/albums/...21-07_1707.jpg https://i166.photobucket.com/albums/...21-07_1702.jpg https://cimg6.ibsrv.net/gimg/www.rx7...9c70caa0f8.jpg https://cimg9.ibsrv.net/gimg/www.rx7...1db74cf11b.jpg |
https://cimg9.ibsrv.net/gimg/www.rx7...a05cabc488.jpg
1 inch lowering springs with AGX's . . . .Liquid Metal rims . . .. . . https://cimg7.ibsrv.net/gimg/www.rx7...c78eec3eb2.jpg https://cimg9.ibsrv.net/gimg/www.rx7...f97a13bf1c.jpg https://cimg2.ibsrv.net/gimg/www.rx7...e65c0e47fe.jpg |
SSR RS8 16x + 33 / 45
Just picked these up and threw them on my 88 FC with BC Racing BR coils. Surprisingly zero fitment issues, fit perfect with no rubbing or any rolling required. Really happy with the fitment but going to mess around with the front camber plates. 16x8 all around, +33 on rear and +45 on front. 175/60r16 tires.
https://cimg1.ibsrv.net/gimg/www.rx7...6d66bee333.jpg https://cimg0.ibsrv.net/gimg/www.rx7...c89db2c547.jpg |
| All times are GMT -5. The time now is 09:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands