RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)
-   -   pic request. anyone slammed on megan track coilovers? (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/pic-request-anyone-slammed-megan-track-coilovers-989288/)

beachFC 02-28-12 03:49 AM

pic request. anyone slammed on megan track coilovers?
 
would like to see how low they can go before i make my decision on coil overs. thanks in advance.. i have been searching for EVER though fitment threads and build threads. but can't seem to find what i wana see

Furb 02-28-12 08:39 AM

Contact a dealership, or better yet, the manufacturer.
they should be able to tell you how low you can go

Rotary_Junkie 02-28-12 09:24 AM

To be honest the guys you find on here that are "slammed" has spent mega mulah on the suspension. They are mainly pbm's d2. No one rocks the cheap shit. If you are looking for the slammed look, spend the extra cash and make sure ur on wheels that will fill the wheel well, 17s or 18s

beachFC 02-28-12 03:24 PM

obviously i wish i could haha.. but i cant :l

and i like the stiffness of megans to be honest.. i really actually prefer them over my friend's JIC's the jics seem too much like tein, they're just soft and shit.. my friends s13 was super low on megans.. his bumper was inches off the ground.. and it drifted very nice with absoltely no body roll.. i loved it.

SoCalFC 02-28-12 07:18 PM

keep trying to convince yourself that an $800 suspension is better than an $1800 suspension.
i like my Teins just fine and would never trade them for Megans, or PBMs for that matter.
just saying..

beachFC 02-29-12 02:30 AM


Originally Posted by SoCalFC (Post 10998022)
keep trying to convince yourself that an $800 suspension is better than an $1800 suspension.
i like my Teins just fine and would never trade them for Megans, or PBMs for that matter.
just saying..

no, stop trying to convince me the other way around. i have tein he's right now xD hahahaha i like the megans better. :l i know because i've driven both. i hate my teins. sorry :X wan a buy 'em?

FC_EDDIE 02-29-12 10:45 AM

Funny how much ignorance there is out there in the world. I'm willing to bet half the guys that say Megan coilovers are cheap dont ever track their cars.... why the hell would you spend $1800 on baller ass coilovers to daily drive their cars :scratch:

I've been rocking Rotary Works coilovers on both FCs for a few years, our drift cars use them, and street cars all have them and guess what....perfectly fine!

to OP: if you plan on just daily driving your car with a bit of windy roads here and there or aggressive driving from time to time....I HIGHLY recommend Megans or Rotary Works or any other decent named "cheap" coilover. The Megans and RW both will almost sit the frame of your FC on the ground.


Bet you didnt know that Tein HE and the new Apexi basics are the same as Megans and other ebay companies :nod:


This is my FC on Rotary works coilovers which are almost identical to Megans and I still had 1" to go

http://i6.photobucket.com/albums/y24...Rockofront.jpg

beachFC 02-29-12 01:33 PM


Originally Posted by FC_EDDIE (Post 10998814)
Funny how much ignorance there is out there in the world. I'm willing to bet half the guys that say Megan coilovers are cheap dont ever track their cars.... why the hell would you spend $1800 on baller ass coilovers to daily drive their cars :scratch:

I've been rocking Rotary Works coilovers on both FCs for a few years, our drift cars use them, and street cars all have them and guess what....perfectly fine!

to OP: if you plan on just daily driving your car with a bit of windy roads here and there or aggressive driving from time to time....I HIGHLY recommend Megans or Rotary Works or any other decent named "cheap" coilover. The Megans and RW both will almost sit the frame of your FC on the ground.


Bet you didnt know that Tein HE and the new Apexi basics are the same as Megans and other ebay companies :nod:


This is my FC on Rotary works coilovers which are almost identical to Megans and I still had 1" to go

http://i6.photobucket.com/albums/y24...Rockofront.jpg

damn! what size wheel/tire?

Saavedro88 03-02-12 12:15 PM


Originally Posted by Rotary_Junkie (Post 10997231)
To be honest the guys you find on here that are "slammed" has spent mega mulah on the suspension. They are mainly pbm's d2. No one rocks the cheap shit. If you are looking for the slammed look, spend the extra cash and make sure ur on wheels that will fill the wheel well, 17s or 18s

How do you draw this assumption? I've seen lots of people with K-sports and all kinds of other shit on this forum, and I've never even heard of PBM.

Here's my 90 on Megan Racing Tracks. They were cheap as shit, but hey, I like them. And yes I have tracked this car (not at this height) with these coilovers, they're nice for drifting, but for grip, forget about it.

http://a8.sphotos.ak.fbcdn.net/hphot...00556972_n.jpg

This is before I lowered it three more times, I don't currently have a picture of how it sits right now.

beachFC 03-02-12 01:38 PM


Originally Posted by Saavedro88 (Post 11001915)
How do you draw this assumption? I've seen lots of people with K-sports and all kinds of other shit on this forum, and I've never even heard of PBM.

Here's my 90 on Megan Racing Tracks. They were cheap as shit, but hey, I like them. And yes I have tracked this car (not at this height) with these coilovers, they're nice for drifting, but for grip, forget about it.

http://a8.sphotos.ak.fbcdn.net/hphot...00556972_n.jpg

This is before I lowered it three more times, I don't currently have a picture of how it sits right now.


damn station wheels fit nice

Saavedro88 03-02-12 04:39 PM


Originally Posted by beachFC (Post 11002022)
damn station wheels fit nice

Kind of. The rear's would poke out a ton if I didn't have so much negative camber, and the fronts have a 1.5 inch spacer behind them. There's a lot more info on my setup in the Starion Wheels Picture Request thread.

beachFC 03-02-12 07:21 PM


Originally Posted by Saavedro88 (Post 11002204)
Kind of. The rear's would poke out a ton if I didn't have so much negative camber, and the fronts have a 1.5 inch spacer behind them. There's a lot more info on my setup in the Starion Wheels Picture Request thread.

16x8 -10 right?

schaft 03-02-12 07:53 PM

http://a8.sphotos.ak.fbcdn.net/hphot...00556972_n.jpg

This is before I lowered it three more times, I don't currently have a picture of how it sits right now.[/QUOTE]

First off sexy car man...second these are the same coilovers I'm order if I get my new job.
when u say u lowered it 3 more times how big of a difference is it from this picture?

Saavedro88 03-04-12 11:54 AM


Originally Posted by beachFC (Post 11002386)
16x8 -10 right?

No, I have the SHP's so they're 8 inches wide in the front and 9 in the rear. I don't recall what the offsets are at the moment.


Originally Posted by schaft (Post 11002417)
http://a8.sphotos.ak.fbcdn.net/hphot...00556972_n.jpg

This is before I lowered it three more times, I don't currently have a picture of how it sits right now.

First off sexy car man...second these are the same coilovers I'm order if I get my new job.
when u say u lowered it 3 more times how big of a difference is it from this picture?[/QUOTE]

Noticeably. The front tires are much more tucked under the fender. The rears are too, but not as much.

TheAbsence 03-04-12 07:22 PM

http://farnorthracing.com/autocross_secrets6.html

Turns out most coilovers are crappy at competitive levels. But if you're driving on the street like I am, who cares.

beachFC 03-05-12 02:06 PM

do you know ho low megans will let you go? i eventually want 18's and stock body, but only if i can o low enough

Hayseed7 03-06-12 12:39 AM


Originally Posted by beachFC (Post 10997695)
and i like the stiffness of megans to be honest..

This is super ignorant. Alot of coilover companies, even cheap one's like BC to PBM to higher end stuff will usually give you valving and spring rate options. I know for a fact BC will do all that for free if you just call them, I think PBM does it for free too.

I understand the wanting cheap coils mindset, heck I had some $300 Raceland's on my scion tc back in the day just to slam it. But when I got my BC's, and later my PBM's, you can really tell a huge difference, especially when you slam a crappy coilover. Idk, I'm new to FC's but i've been around slammed cars enough to know that just to slam you're best off with a reputable brand. I can only imagine that for performance its going to be similiar. ( and yes I do understand that slammed =/= performance, I'm just using an example.)

beachFC 03-06-12 03:26 AM


Originally Posted by Hayseed7 (Post 11006437)
This is super ignorant. Alot of coilover companies, even cheap one's like BC to PBM to higher end stuff will usually give you valving and spring rate options. I know for a fact BC will do all that for free if you just call them, I think PBM does it for free too.

I understand the wanting cheap coils mindset, heck I had some $300 Raceland's on my scion tc back in the day just to slam it. But when I got my BC's, and later my PBM's, you can really tell a huge difference, especially when you slam a crappy coilover. Idk, I'm new to FC's but i've been around slammed cars enough to know that just to slam you're best off with a reputable brand. I can only imagine that for performance its going to be similiar. ( and yes I do understand that slammed =/= performance, I'm just using an example.)

THAT is ignorant. am i not entitled to my own opinion anymore? hahaha i've driven jic's, megans, tein, bc'.. and IIIIIIII F*CKING LIKE MEGANS. is that not okay? jesus f*cking christ. is it impossible for me to prefer the feeling of megans over other brands? sh*t walmart is a reputable store right? well sorry but i like to shop and the small less known store at the corner.

FC_EDDIE 03-07-12 10:16 AM


Originally Posted by beachFC (Post 10999050)
damn! what size wheel/tire?

The white car has 17x9 and 17x8 +35 with 235/40 rears and 215/30 fronts with just a minor fender roll.


This is my latest FC with RW coilovers sitting on 18x10.5 & 18x9.5 with 255/40 and 235/40....20mm front fenders and 50mm rear over fenders. The coilovers sell for like $750 +S&H but I love them.

The RW coilovers still have another 2" drop left on this picture



http://i6.photobucket.com/albums/y24.../Rocky1low.jpg

schaft 03-08-12 05:45 PM

Eddie you got a front pic of how that car sits?

Chriz88DX 03-09-12 01:06 AM

80% of coilovers are never set right which can cause a crappy rough ride and poor performance.

Preload is a real thing so set it properly ...........

beachFC 03-09-12 03:28 AM


Originally Posted by Chriz88DX (Post 11010501)
80% of coilovers are never set right which can cause a crappy rough ride and poor performance.

Preload is a real thing so set it properly ...........

you mad?

djchiptoothsfc 04-06-12 11:29 AM

Being slammed is rice

finishline 04-06-12 12:27 PM


Originally Posted by Saavedro88 (Post 11004294)
No, I have the SHP's so they're 8 inches wide in the front and 9 in the rear. I don't recall what the offsets are at the moment.

16x8 +18, 16x9 +0 :icon_tup:

i hope to steal these wheels from the next SHP starion i see on the road. lol

rotaryracer1 04-08-12 01:20 PM

More pics from FC EDDIE please


All times are GMT -5. The time now is 02:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands