|
how to remove paint on rims (s5 t2)
Well i've notice a couple people have had turbo rims for a s5 have had it painted black. This is for those who want to remove that paint and make em look new.
Remember everybody's rim is different read instructions on the can to avoid damage, im am not responsible for any damage this is just how I done it, would not use on chrome rims! Before http://i178.photobucket.com/albums/w...06-45_28-1.jpg Items needed: paint stripper (tar-strip works best) sponge or paper towels Wheel clear coat Wheel cleaner Since we're using paint stripper its gonna remove the paint as well as the clear coat on them, which is good because it will leave a nice shine of bare rim but it needs clear coat to protect it. http://i178.photobucket.com/albums/w...-53-50_308.jpg First spray painted rim with paint stripper on rim and let it sit for at least 10mins, you should see it bubble like this http://i178.photobucket.com/albums/w...-54-05_127.jpg After a couple of minutes wipe paint with a sponge or rag. For mesh wheels with alot of veins use a firm toothbrush to get between those tight areas. http://i178.photobucket.com/albums/w...-00-17_855.jpg Once u wiped off as much as u can wash with soap and water. Check if you missed areas, if so dry rim and apply more painted stripper on those areas. This is what mine looked like with out clear coat. A good before and after pic http://i178.photobucket.com/albums/w...-39-52_869.jpg Now when apply clear coat to rims you want to spray on evenly, I sprayed about 5 coats of clear on. Wait at least ten mins to apply another coat after the 1st one. With clear on http://i178.photobucket.com/albums/w...-21-52_288.jpg Remember kids wear gloves u don't want this stuff on your skin! |
Now as for the center caps mine were really sun faded I don have a before pic
But what I did was clean it up and got this spray can which worked really well http://i178.photobucket.com/albums/w...-20-27_929.jpg After 3 coats this is and some clear this is what I got http://i178.photobucket.com/albums/w...-19-35_460.jpg Will take better pics soon |
Looks good! How long did it take to restore all four?
|
Im gonna say about 4 hours or 5 its the veins that make it a pain
|
Yeah I bet. Mesh seems like a pain! Especially those little triangle areas by the center caps
|
Mar Hyde "Tal Stripper" is good too..aircraft grade.
I did a hood in like 20 minutes! |
Grab some black trash bags next time. Spray the parts as you would and seal them inside the trash bags. This keeps the fumes around the wheel and helps prevent the stripper from evaporating to it work faster and goes farther. Also scuffing or scratching the surface before spraying will jumps start the process.
|
looks great dude! awesome work. Now we need some on-car shots.
|
can you do this with tires still mounted?
|
Originally Posted by LIMON
(Post 11059326)
can you do this with tires still mounted?
|
|
Looking good! I really like the S5 wheels on an S4. It looks sharp.
|
question!
how did you get in between the little tiny triangle spokes? im currently doing the same but with SSR Reverse Mesh...real pita.. one more wheel to strip.. |
SSpray in there get a tiny tooth brush and scrub off what remains or use a q-tip, remember to wear gloves
|
| All times are GMT -5. The time now is 01:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands