Originally Posted by SlideAlliance
(Post 8910676)
Lower the rear
...the back doesnt have the kit |
Im not quit done i still have to put the rear bumper on i was losing light so i had to call it a day.
as for lower in the rear my stance coils are maxxd out and i dont want to drop the spring down. i think its time for 18s :hahaha: |
bn ftw
prepare to scrape |
decided to keep teh car? keep it comin!
|
Im raiseing the front to be level with the rear but i wont be that low:icon_no2:
i would screw the spring down but i dont want to throw of the damping specs or blow out the coils? im not trying to make this into a tech post but if Stance said not to drop the spring down and leave it should i? |
Originally Posted by NoPistons!
(Post 8856751)
That's low.
I need to meet you eventually. Go to lowes motor speedway often? I'm surprised you're that low. The roads in NC are terrible. Hope that kit is made of that "unbreakable" fiber vis uses. Dude, i can't believe you're moving to michigan. I thought that was you when you dropped me a pm. Bring your seven!!!! I want to see! That way, you can park it next to mine and we can discuss how much mine sucks at the moment..... |
I see what you mean. im still trying to get the stance right so im going to play around with the height and an put the rear bumper. will post pics up after.
|
lose the sleepy eyes.
looks bad. |
Yes.
No rake! Are you running helper springs? You can also remove collars ... But with the helpers, you can sag 1'' inch of spring safe.
Originally Posted by rotoryking17
(Post 8911646)
I see what you mean. im still trying to get the stance right so im going to play around with the height and an put the rear bumper. will post pics up after.
|
lower the rear to match the front dont raise the front lol
|
GODDAMNIT LOWER THE REAR!
Haha really though. Don't raise the front, the front is fine. Lower the rear. Droop the spring, I did it for forever, it'll be fine. |
Originally Posted by rotoryking17
(Post 8911367)
Im raiseing the front to be level with the rear but i wont be that low:icon_no2:
i would screw the spring down but i dont want to throw of the damping specs or blow out the coils? im not trying to make this into a tech post but if Stance said not to drop the spring down and leave it should i? It's fine to adjust these some, without going too extremes one way or the other, or the pre-load can become so harsh that the spring runs in to coil bind, or too soft and the damper is too greatly affected and can blow. You'll just want to keep in mind what changes you've made where, and try to keep it uniform. You'll definately notice the changes you've made after driving. |
There is no helper spring on the stance coilovers. as far as drooping the spring i might go a tad but nothing major. it look like its rake lifted in the pics but believe me its not. trust me guy after i send it to paint it will look proper.
Originally Posted by Risky Devil
(Post 8911872)
Yes.
No rake! Are you running helper springs? You can also remove collars ... But with the helpers, you can sag 1'' inch of spring safe. |
2 Attachment(s)
|
4 Attachment(s)
Looks weird cause the ground is convex.
Attachment 687784 Attachment 687785 Attachment 687786 Attachment 687787 |
1 Attachment(s)
Want to go lower but my BC's are maxed out in the back. Kicking myself for not getting shortened shock bodies.
Attachment 687774 |
1 Attachment(s)
|
Originally Posted by Saavedro88
(Post 11323330)
Looks weird cause the ground is convex.
http://i261.photobucket.com/albums/i...DSC_0012-5.jpg http://i261.photobucket.com/albums/i...DSC_0014-6.jpg http://i261.photobucket.com/albums/i...DSC_0031-4.jpg http://i261.photobucket.com/albums/i...DSC_0035-2.jpg |
1 Attachment(s)
|
Originally Posted by vdubgreg
(Post 11344299)
What's your set up?
|
Originally Posted by AngelsAndBombs
(Post 11326771)
|
Originally Posted by Saavedro88
(Post 11345530)
Megan Racing Track coilovers. Got lots of lower left to go, but it's not practical with the way most of the roads are around here.
|
Originally Posted by Saavedro88
(Post 11323330)
Looks weird cause the ground is convex.
http://i261.photobucket.com/albums/i...DSC_0012-5.jpg http://i261.photobucket.com/albums/i...DSC_0014-6.jpg http://i261.photobucket.com/albums/i...DSC_0031-4.jpg http://i261.photobucket.com/albums/i...DSC_0035-2.jpg |
Thanks dude.
195/40R16 Front and 215/40R16's Rear |
1 Attachment(s)
Dragging that rear bumper son!!!!!
Attachment 684484 |
All times are GMT -5. The time now is 06:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands