FC3S Video thread
 

I think that we should have a thread with videos showing our rides.There is so many people building and talking about projects that we only see on pictures but most of them we have not seen them running............i will like 2 see a short video of your fc running and a brief description of what mods have you done so far so no more talking and here is mine
Car
1987 mazda rx7 4 lug with 1k miles
S5 bridged turbo motor,pinned,balanced,oem rebuild kit
turbonetics ball bearing 76mm
microtech lt8
FD fC hybrid trans
os giken triple plate

The car has been not started like i a month on this video and it was 27 degrees outside when the video was taken.
cold start up - YouTube

Here is my car, I'll also post a video up of my turbo'd vert identical set up but with a roll bar. I haven't updated what i've done in awhile.

B/C Racing coil over, polyurethane bushings, solid engine and trans mounts, 680cc primary/1000cc secondary, Apexi avc-r, Safc II, Rtek 1.7 chip, 3" downpipe to Greddy Sp2 exhaust, Fd fuel pump, Hybrid .60 trim turbo, stock intake ports, street ported exhaust, Fmic + blitz bov, Taurus 1 speed fan, racing beat oil baffle plate and oil brace pan, cxracing radiator and a few more goodies. Running 15psi peak boost and drops off to 10-12psi after 6,600rpm

I plan on putting my aftermarket manifold and upgrading turbos because I hate how bad the turbo chokes. I made a hybrid with just using the stock turbine wheel with stock s5 hotside non-ported wastegate.

I've also done a tubular front end on my fc but that only lasted 2 weeks until the car got totaled dumb street racers. everything was road legal also! but whatever, I can do it all again if needed. But I wanna get the cars suspension dialed out so I can road race it and more fun drift events.

Oh at the start of the video, I do not know why it glitches. But this is one raw video no edit no music.

lol the end was a little anitclimactic. lots of noise/action, then nothing.... (insert cricket chirp)

<iframe width="420" height="315" src="http://www.youtube.com/embed/lrFDbJ2057Q" frameborder="0" allowfullscreen></iframe>
<iframe width="420" height="315" src="http://www.youtube.com/embed/TLLCbgQ0L-o" frameborder="0" allowfullscreen></iframe>

90 t2 with street port
greddy t78 turbo and manilfold
32x4x12 fmic
1600/1000 injectors
Haltech e6k in first video and microtech mtx8 in second
dual aeromotive stealth and walboro fuel pump with 10mm stainless steel lines to parallel fuel lines with aeromotive fpr
volks cv wheels 17x9.5 and 17x8.5 with 275/40/17, 245/45/17
tein ss coilovers
poly bushings all around
and lot more stuff too much to list lol

Short onramp video.

e6k
street port
t04b h-trim/t4 p-trim
550/1600
Toyo R888 245 rear tires

Badass!