RX7Club.com - Mazda RX7 Forum - FC Wax 'N Photo Shoot

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Non-Technical and pictures (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/)

- - FC Wax 'N Photo Shoot (https://www.rx7club.com/2nd-generation-non-technical-pictures-198/fc-wax-n-photo-shoot-781937/)

FC Wax 'N Photo Shoot

I guess I'll go with the majority, CLEAN!! It really is! :icon_tup:

Nice string :P

Nice car :D

Quote:

Originally Posted by Travis V (Post 8493954)

I guess I'll go with the majority, CLEAN!! It really is! :icon_tup:

Thanks for the comments guys!!! :icon_tup:

Quote:

Originally Posted by Syncro (Post 8493962)

Nice string :P

Nice car :D

LOL

yeah i dont have anything to mount it...

Hence the string....

It works, but better than nothing, since if it shakes it would cause stumbling

Need my shades to look at your car. Good work.

Nice!!! Clean S4s FTMFW!!!:bigthumb:

I wonder if mine ever looked like that:tear:

Damnnnnn thats a nice red FC.

I waxed my grey S5 it got less shiny than it was before. I think mines broke. :(

Very nice man , clean as hell, but is really a 15x6 spec rims worth its own picture?

Quote:

Originally Posted by g14novak (Post 8495396)

Damnnnnn thats a nice red FC.

I waxed my grey S5 it got less shiny than it was before. I think mines broke. :(

did you do it by hand or buffer wheel? And what polish?

BEWARE OF NUFINISH!!! Total junk might as well amery cloth on your car if your going to use NUFINISH hahaha

Maybe you went too hard and went into the clear coat? :wallbash:

I did it by hand with an old dirty bath towel fyi A childhood Garfield one hahaha :lol:

Quote:

Originally Posted by OutCold (Post 8495415)

Very nice man , clean as hell, but is really a 15x6 spec rims worth its own picture?

LOL well i meant to capture my 4 pot calipers (has nice paint) and drilled rotors... But the rims don't show em well....

Quote:

Originally Posted by ecko (Post 8495522)

yea very clean car.

thanks :)

Nobody noticed my school made short shifter :icon_no2:

http://i241.photobucket.com/albums/f...t/fcwax018.jpg

FYI used 13 year old Excalabur wax that was gathering dust in my garage hahaha

http://i241.photobucket.com/albums/f...X-7/wax001.jpg
http://i241.photobucket.com/albums/f...X-7/wax002.jpg

What's up with the negative oil pressure? Try Zymol polish. Good stuff.

Quote:

Originally Posted by NCross (Post 8496812)

What's up with the negative oil pressure? Try Zymol polish. Good stuff.

Sending unit is bunk.... When the key is on the on position it spikes off the scale....

I used to have a problem with my 88's wire popping off the prong and messing up the signal. Cleaned it like hell with some carb cleaner and zip tied the mofo on so it wouldn't wiggle off.

Quote:

Originally Posted by NCross (Post 8496883)

I used to have a problem with my 88's wire popping off the prong and messing up the signal. Cleaned it like hell with some carb cleaner and zip tied the mofo on so it wouldn't wiggle off.

Nah ive cleaned it with electrical cleaner and scrubbed it to shits, but didn't work, plus the sending unit is dented to shits... most defenately busted haha

Track down a new one. It's a pretty easy install. I would recommend having one.

my cars from Full Circle mazda too!