CosmoQuick's 86GXL Restoration Build Thread
Hello peoples, well to make a long story
short I paid almost nothing for the car with 112k on it pretty clean chassis that has never been wrecked here i s what it looked like when i got it http://i40.tinypic.com/sm39e8.jpg http://i39.tinypic.com/2u55q51.jpg Here it is as of now four months later. I have almost finished the bodywork and block sanding, next will be two coat of primer followed with another block sanding another coat of primer with guide coat and another block session. As it is pretty damn cold right now I am taking my sweetass time with the prep due to weather lol. http://i43.tinypic.com/r797ah.jpg http://i39.tinypic.com/2upvm9h.jpg http://i39.tinypic.com/33a599c.jpg http://i44.tinypic.com/ddnfpe.jpg http://i44.tinypic.com/2j1v24o.jpg http://i42.tinypic.com/9jd1qu.jpg As for the build plan, I am going to completely upgrade and mod the suspention systen with a set modded knuckles and supernow tierod ends, brakes are done already, as for the engine 13b n/a with all the normal bolt on crap, ss lines and AN fitting, koyorad radiator, blahblah yaddayadda The interiors....... well what interior a dash, two door panels, two racing seat and harnesses and a 6 point roll cage, drop-in 12gallon fuel cell, aeromotive fuel pump, ss lines, AN fittings, after i get it on the road im hoping to swat a streetport 13bt and build a custom turbo mani run a nice gt40 twin gated fmic super street slut ps sorry for the picture sizes fellas if a mod would like to resize them for me that would be ok i tried with no avail in success |
Looks like you have your work cut out for you. I did the same thing a couple years ago.
|
yah just a little lol but nothing that I havent done before, god i just want it to get warmer so I can paint this whore and start putting it back together the attic in my shop is were the rest of the rx7 resides, also if there are any parts that i delete i plan to sell here on the forums so hit me up and see if i have what you need and i dont want, all procedes go directly to the build
|
I'm doing a similar project, everything gutted, but i'm a noob to body/chassis/electrical so I haven't been workin on it much. Interior is not completely gutted, wiring/heater/ac components/steering is still on there. I'm glad you posted this CosmoQuik, gives me an idea of where I need to be to get things rollin.
|
Originally Posted by thummyuken
(Post 8915293)
I'm doing a similar project, everything gutted, but i'm a noob to body/chassis/electrical so I haven't been workin on it much. Interior is not completely gutted, wiring/heater/ac components/steering is still on there. I'm glad you posted this CosmoQuik, gives me an idea of where I need to be to get things rollin.
|
Good god that thing is stripped.
Good luck with the build. Weather does suck, i understand that completely. john ny |
g/l with the build u got a long way too go.
|
urg, if i had the motivation right now to strip my car bare for chassy work, i would. Good luck with the build, keep us posted!
|
man....... you guys make it sound like im going to take forever to finish this thing lol.. you people dont know me, I did most of the bodywork and sanding in one morning, as for stripping the rest of it well i figure a good three days worth or work ie 24-30 hrs worth, if money and weather wasnt a issue i could do this in 2 months, thanks for checking my build out and all the positive reenforcment stay tuned for more updates as thing move along hope to post some more pics tonight or tomorrow
|
Originally Posted by CosmoQuik
(Post 8915921)
man....... you guys make it sound like im going to take forever to finish this thing lol.. you people dont know me, I did most of the bodywork and sanding in one morning, as for stripping the rest of it well i figure a good three days worth or work ie 24-30 hrs worth, if money and weather wasnt a issue i could do this in 2 months, thanks for checking my build out and all the positive reenforcment stay tuned for more updates as thing move along hope to post some more pics tonight or tomorrow
lol j/k Sounds like with what you have done so far, you have the ability to finish in a timely manner. Unfortunately for many of us, we don't have the luxury of shell prep time nor the resources either. |
Originally Posted by WingsofWar
(Post 8916128)
Well you know how this kinda stuff goes...you expect to finish in less than 2 months..and you blink and find yourself 1 year out and still not done.
lol j/k Sounds like with what you have done so far, you have the ability to finish in a timely manner. Unfortunately for many of us, we don't have the luxury of shell prep time nor the resources either. names mark by the way |
aewsome
|
Spend a few hour redoing the chassis harness, deleted the wiring for the adjustable suspention crap, and rewrapped the whole thing in fresh 3m electrical tape
http://i40.tinypic.com/1zr0uhj.jpg thats it for updates not much bet ever bit counts |
Motivation for you...
When I picked it up it was missing some glass, front end, 4 different colors, no interior, engine, trans, STRIPPED! To this the next day... http://i24.photobucket.com/albums/c1...ect/NEW016.jpg http://i24.photobucket.com/albums/c1...ect/NEW015.jpg http://i24.photobucket.com/albums/c1...ect/NEW002.jpg 2 weeks later... http://i24.photobucket.com/albums/c1...ect/NEW004.jpg AND 2 months later... http://i24.photobucket.com/albums/c1...Picture001.jpg http://i24.photobucket.com/albums/c1...Picture007.jpg http://i24.photobucket.com/albums/c1...0T2/NEW032.jpg Not perfect... but DAMN what a difference! Never give up! |
wow what a difference man. Looks great! :icon_tup:
|
I'm rebuilding this from the ground up purpose built for driving pleasures, i think its alittle different then putting yours back to factory, i bought a complete car and tore it down
|
Im currently looking for a project FC and this is some inspiring stuff.
Great work! |
All times are GMT -5. The time now is 09:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands