235 40 17 tire upfront pics ?
 

im looking for a pic of a fc rolling on 235 40 17 tires my fenders are already rolled .

I know its not exactly what you were looking for but here goes

Kumho ecsta 215/45-17 on 17x9.5 Motegi Touge all around

EDIT: I didnt roll fenders, but the inner edge was pounded flat. Also third pic is at full lock with stock ps rack. Only steering/suspension mod at the time was my pbm coilovers at neg four mark(normaly ran at neg three w/o issue).

235/40 on the front? Holy crap. I just put 235/40's on the rear of my FC and I was thinking they were too wide, lol...

lol i need wide i guess well se i had all stretched tires last year i think its gay now need more pics

I have 235/40R18 in the rear with 1" spacers in the back. Fits just fine with or without the spacers. They're +25 offset wheels. I could go much wider in the rear. The front on the other hand is really close at 225/40R18. Same offset wheel, 5/8" spacer. I rolled the fenders and it's super close, although I think 235 would fit with enough massaging of the fender.

Here you go. 235/40/17 on 17X9+24 with rolled fenders.

Attachment 656094
Attachment 656095
Attachment 656096

Just saw this thread an realized I have this tire size lol

17x8.5 in the front
http://i18.photobucket.com/albums/b1...psb1194c06.jpg

Attachment 655530

Attachment 655531

Those of you running a 235 in the front, how close are you to the coil springs? A 215 on my current setup is close. I dunno if I would want to try a 225 in the front. I run a 235 in the rear with no spacers on OZ Superlaggera.

https://scontent-a-atl.xx.fbcdn.net/...83115761_n.jpg

You probably need a wheel with less offset then. What are the specs on your OZs?

17x8 and 9. +35. 235/40F and 245/40R KDW2's. No roll, no rub, no worries. I bought 'em from Rishie at AutoRnD.

http://www.mazdas247.com/members/Nat...7/HKS_side.JPG
http://www.mazdas247.com/members/Nat.../HKS_front.JPG

Wow! I had 8.5 in the front and they did not sit as perfect as yours. Are you running a spacer in the front? It looks great. I don't have the RPFs anymore though....

No spacers, I just slapped 'em on. They came off of Rishie's GTU-S.

And thanks! I miss that car. :)


EDIT: Found an old pic of the GTUs in Rishie's shop.
http://www.mazdas247.com/members/Natey/ARDwheels.jpg

Nice. Mine came on the car and even though I think they are great, they are just not my taste so I took them off. I never knew the offset they were, but they didn't sit as nice as yours.

17x8 +35 with 235/40/17 on front
17x9 +38 with 255/40/17 on rear

with Tein coilovers

mustang wheels
 

no spacers lowered on racing beat springs.

235/45/r17 all around on stock suspension. No rubbing whatsoever

I don't have 235s upfront but I do have 17x8 225/45s in the front and 17x9 245/45s in the rear on my Turbo vert. Car is riding on eibach springs lowered in front and back by 1 inch with tokico blues

groznyiv your vert is so clean man!! Love it!

i know she is crusty but here is a good front shot on 235/40/17 on the xxr 527 17x9.75 +25 offset with a 15mm bolt on spacer and -1 of camber car is also 4 lug which i really think makes a difference in offset. because my sport model although 5 lug sits different with a +25 up front. rear tires are xxr 17x9.75 +25 with a 50mm bolt on spacer with 255/40/17 close to -2 degrees camber fenders rolled and pulled front and rear

https://scontent-b.xx.fbcdn.net/hpho..._4582288_n.jpg

https://scontent-b.xx.fbcdn.net/hpho...80193997_n.jpg