|
Coolant line routing for T4 turbo
hey all, quick question that I am hoping to get some help with. I tried googling this and couldn't seem to get straight answer/old threads with no more pics.
I have installed a T4 turbo, and the coolant lines I am using are the nipple on rear rotor housing running to the top feed of the turbo (I've removed the throttle body need for this) and I have the return running to the nipple on the bottom of the waterpump right near where the large hose goes to the bottom of the rad. Is this routing correct and will work properly ?https://cimg8.ibsrv.net/gimg/www.rx7...9b54e3bfb3.jpg https://cimg0.ibsrv.net/gimg/www.rx7...c3bd843c30.jpg |
Thats the route I used for my bnr turbo aswell since I pulled the lim off from a blown o ri g leaking coolant. Blocked the oem port off through the lim and just looped it the same as your plan. No issues, I also have the throttle and bac bypassed. |
| All times are GMT -5. The time now is 08:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands