My JC Cosmo buildup
 

Hello Guys!!

Cosmo Owner from Norway here!

I have a 1990 model JC Cosmo WIN JCESE-100914
For about three years I have driven it original, but this winter I have rebuilt the engine and transmission.

The Engine has been streetported and have FD exhaustsleeves. I have used Hurley 2 piece apexes and the engine has been fully balanced. It was 40 grams wrong!!!!!

I have a Greddy T88-34D turbo and are planning to the stock ECU (RE-Amemeya modified) and Greddy E-manage piggyback.

I have 1600cc injectors, extreme fuesystem, SX pressure regulator and a fuel filter.

The IC and radiator is made by Plazaman in Sidney. Polished. Both as big as it can get. (IC is 6" thick)

Brakes are Willwood superlite and 330mm discs made by Pac Performance in Sidney.

The seats are Rx-7 FD.

Yokohama tires 285-30/18 on 10" back and 245-35/18 on 8,5" in front. Wheels are from Artec.

Tein Coilovers and strut tower bars from Cosmo Owners Club in Japan.

1 oilcooler to the transmission and 2 for the engine. Everything with XRP connections.

Ferrita Exhaust system. lifetime warranty. 4" downpipe...down to 3" under the car and twin 2,5" to the rear end.

Stereosystem is a mix of everything.

In about a week I will attemt to start and make it ready for a big autoshow in the neigbour country, Sweden.
Wish me luck!! I think I will need it:-)

:D

sidepic

pretty

backpic

enginebay

turbo

intercooler ++++

OMG ...damn thats not fair! but it sure is classy. inside pic please :) tranny rebuilt or swap to manual?

Best of luck when you go to Sweden. I think you have done a great job. Your motor looks awesume. Do you have any HP numbers?

Again...good luck!

OLiver

intercooler and oilcoolers

ignitors, dump valve......

fuel and oilfilter

downpipe wrapped

build of exhaust

inside.....stereo in the door and Momo steering wheel
(a pic befor FD seats and E-manage

brakes

the stereo

the gauges (some of them......)

the plate on the inlet says "MASSIVE THRUST BY MAZDA"

frontwheel

The engine should produce about 600 hp@1,0 bar (based on the flow figures)

I have rebuilt the autotranny and strengthend it. A company here in Norway called RATS has done the job.

Looking very good, Roy!

That's one beautiful Cosmo. :drool:

I just hope my 90 Type-S will be as good as yours one day.

The Cosmo is such a beautiful thing.

very nice.

i wonder why mazda never brought them over to this side of the pond.