RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   20B Forum (https://www.rx7club.com/20b-forum-95/)
-   -   Mr. LV's 3 rotor dyno run (https://www.rx7club.com/20b-forum-95/mr-lvs-3-rotor-dyno-run-380264/)

Mr. LV 12-26-04 08:48 PM

Mr. LV's 3 rotor dyno run
 
1 Attachment(s)
As soon as I get the video hosted, I will put it up. 458 rwhp on a mustang dyno @ 15 psi. Stock motor, 1600 cc secondaries, T-66, haltech Ell V2.Mustang dyno rep said to take about 28% loss (seems a tad high to me?) for a dune buggy running through the big trans and axles and stuff. This puts it around 630 hp at the flywheel.

setzep 12-27-04 11:34 AM

That looks really frickin neat! What are you going to do with all that power in a little buggy???

20B Junkie 12-27-04 01:39 PM

Awesome project! Does it wheelie?....got any vids of it?

CCarlisi 12-27-04 09:00 PM

Are you using the stock exhaust port sleeves? What is your leading timing and split like at 15psi? That 2ft exhaust system looks pretty menacing!

Mr. LV 01-02-05 07:05 PM


Originally Posted by CCarlisi
Are you using the stock exhaust port sleeves? What is your leading timing and split like at 15psi? That 2ft exhaust system looks pretty menacing!

The motor is completly stock right out of the car minus all the smog crap, stock turbos, and 1600 cc injectors up top. I'm running 8 deg. split and 18 deg leading timing at 15 pounds of boost. I'm gonna do the sleeves either at the end of the season, or if I HAVE to rebuild it by then.

I have videos of it, but the link is messed up right this second. I will get the vids up as soon as possible.

mad20b 01-03-05 04:46 AM

Sounds good, that is the exact same setup as I have, T66 on std block & 1600cc secondaries. I should have mine running in a few weeks, it will be interesting to compare numbers. Sounds like a lot of timing at 15 psi though....

SPOautos 01-03-05 09:50 AM

What kind of transmission setup is this running? Can we get some more pics and info on that???

Thanks
Stephen

Herblenny 01-03-05 10:11 AM

I bet its pretty freaking loud!
Looks great!! I would also like to see some more pics!

Mr. LV 01-03-05 08:29 PM

Got some video's ya bunch of skaliwags! Here is the first.

LV at the drags killing a Twin turbo nothstar!

Mr. LV 01-03-05 08:32 PM

Another for you land lovers!

LV killing a turbod subaru up the hill

GOTBANNED? 01-03-05 08:49 PM

omg thats crazy..wish i had one of those when i lived in kenya..haha

Mr. LV 01-03-05 09:07 PM


Originally Posted by mad20b
Sounds good, that is the exact same setup as I have, T66 on std block & 1600cc secondaries. I should have mine running in a few weeks, it will be interesting to compare numbers. Sounds like a lot of timing at 15 psi though....

I run 112 octane race fuel.

Mr. LV 01-03-05 11:46 PM

1 Attachment(s)

Originally Posted by SPOautos
What kind of transmission setup is this running? Can we get some more pics and info on that???

Thanks
Stephen

I run a Mendeola 2D transaxle. It is an aftermarket transmission based off of a VW bus tranny. Although there is not really any VW parts in it. I haven't had any problems with it, but in my next car I will be using a Fortin sequential gearbox.

Herblenny 01-04-05 06:11 AM

awesome videos! I bet its fun to drive that thing.

dvls-7 01-04-05 06:32 AM

Thats some sick & twisted shit.....I LIKE IT.....:D
Setup looks very clean, good job on everything.


All times are GMT -5. The time now is 10:16 AM.


© 2024 MH Sub I, LLC dba Internet Brands