Metal gaskets for the 20b TB & upper to lower intake manifold connection?
Does anyone make metal gaskets for the 20b TB and upper to lower intake manifold connection?
|
There is an OEM meatal gasket for the TB to UIM. Well at least i just got the gasket for the FD. As far as the upper and lower gaskets... the closest thing i've seen is the thicker white ones made out of the heat isolating compound.
|
I should note that i was using the FD TB also.
|
I wish someone made them out of copper.
|
Originally Posted by rotoryfreak
(Post 7362662)
I wish someone made them out of copper.
Also, engine to LIM, ... REW & Cosmo 13b Copper's in stock. 20b UIM to LIM CAD drawings to make in Copper, for those interested. Let me know ! GT1-20b |
GT1-20b, think you could get some intake flanges made to fab custom intakes off of? I'd like to try my hand at a couple ideas, and would be interested in some aluminum flanges.
I doubt I'm the only one. Any chance? Price? Turnaround time? thanks ryan |
Originally Posted by calculon
(Post 7566606)
GT1-20b, think you could get some intake flanges made to fab custom intakes off of? I'd like to try my hand at a couple ideas, and would be interested in some aluminum flanges.
I doubt I'm the only one. Any chance? Price? Turnaround time? |
if he cant, i can, i will let him post first tho.
|
I'm pretty sure it's safe to say that nobody doing this is going to want to retain the exhaust recirculation, so it should be pretty simple. . .just intake ports and bolt holes.
Post your cost, if GT1-20b can't beat your price, or doesn't think it'd be worth his time, then it would save him and us some time. Thanks ryan |
on the intake and TB gaskets all I can get are paper ones from Mazda.
Dan |
Originally Posted by GT1-20b
(Post 7363807)
I have Copper engine to LIM 20b gaskets in stock.
Also, engine to LIM, ... REW & Cosmo 13b Copper's in stock. 20b UIM to LIM CAD drawings to make in Copper, for those interested. Let me know ! GT1-20b ~Ramy |
20b Copper Gaskets
Originally Posted by FDNewbie
(Post 7582700)
Carlos, I TOLD ya there was a good amount of interest in this! Lets get a group buy goin! :D
~Ramy Anyone who wants one, I've had these in stock for years ! Price is $ 55.oo ea. + freight. Shipping is a bit hi on singles as I have to sandwich it in a long piece of wood to protect from bending. / Ramy : If You want to get a GB going, that would be great ! http://img.photobucket.com/albums/v1...b/886ee2a7.jpg |
Originally Posted by calculon
(Post 7566606)
GT1-20b, think you could get some intake flanges made to fab custom intakes off of? I'd like to try my hand at a couple ideas, and would be interested in some aluminum flanges.
I doubt I'm the only one. Any chance? Price? Turnaround time? thanks ryan I've had Aluminum Intake Flanges made up for years too. We use these all the time, so I always keep a fair # of them in stock. All CAD and cut on Water Jet. Made of 1/2" T-6 Al. Below are some examples. I also keep in stock all types of emission block off plates. http://img.photobucket.com/albums/v1...1232211Mod.jpg |
sorry for jacking the thread.... but how much is the ^ flange?
|
Originally Posted by GT1-20b
(Post 7583606)
/ Ramy : If You want to get a GB going, that would be great !
Thanks, ~Ramy |
Carlos is a bad mofo; :devil:
I'm going to quit my day job and move to miami, that foo' is a hacker for sure. :icon_tup: |
Stupid non-educated question - what is the advantage of metal gaskets over the OEM paper ones? Don't the paper ones inhibit heat transfer? Does the copper seal better? If so, doesn't the surface have to be perfectly straight?
I second the "Carlos is the man" comment! |
the only advantage i can think of is reusability.
|
Originally Posted by patman
(Post 7600483)
the only advantage i can think of is reusability.
3rd Gen guys have also resorted to metal gaskets (available only through Mazda Japan) for the front cover gasket. ~Ramy |
Originally Posted by FDNewbie
(Post 7600999)
In '94+ FDs, the LIM gaskets were metal (standard).
~Ramy Not all the 94's had metal. Mine (build date Sept 1993) had the paper gasket for the LIM and metal for the UIM. The reason mind had the metal upper was because of a Mazda dealer doing the factory recall for the vacuum lines many years ago. |
Originally Posted by t-von
(Post 7632013)
Not all the 94's had metal. Mine (build date Sept 1993) had the paper gasket for the LIM and metal for the UIM. The reason mind had the metal upper was because of a Mazda dealer doing the factory recall for the vacuum lines many years ago.
And just to complicate things, where you are on that spectrum has NOTHING to do w/ your build date (it's prob. related to the batch yours was produced in, and who knows how you can track that info down), as my FD is a LATE '94, and it came w/ R12 and the weaker R1 wheels. Go figure ;) So yea, thanks for the reminder! ~Ramy |
Originally Posted by FDNewbie
(Post 7632366)
And just to complicate things, where you are on that spectrum has NOTHING to do w/ your build date (it's prob. related to the batch yours was produced in, and who knows how you can track that info down), as my FD is a LATE '94, and it came w/ R12 and the weaker R1 wheels. Go figure ;)
So yea, thanks for the reminder! ~Ramy Damn that's wierd. You car is newer than mine and I have the r134a. |
I'm tellin ya...it's not by build date. It's by batches that were run at different (outsourced) third parties at different times.
|
does anyone still sell copper LIM gaskets for 20B?
|
^ I cut all my own gaskets out of the grey gasket paper from Autozone. Works just fine!
|
All times are GMT -5. The time now is 06:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands