RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   Will 15" wheels with 4x114.3 bolt pattern fit (https://www.rx7club.com/1st-generation-specific-1979-1985-18/will-15-wheels-4x114-3-bolt-pattern-fit-493457/)

rx7-ralfi 12-23-05 09:45 PM

Will 15" wheels with 4x114.3 bolt pattern fit
 
?

ApG Spaz 12-23-05 09:47 PM

do you have an SE?

rx7-ralfi 12-23-05 09:50 PM

82 gsl

inuissus_cendi 12-23-05 09:56 PM

no

steve84GS TII 12-23-05 10:08 PM

You need wheels with 4X110MM lug pattern,which is a rare one.
Its a general PITA to find a good selection of wheels for non-SE 1st gens...

Lee Lyons 12-23-05 10:29 PM

non-se I suggest either going with some wheels that you know you can find like panasports, enkei mesh, roh snypers...either that or buy some wheel adaptors and go to 5*114.3 which will give you almost infinite options...

SparkienSuggah 12-24-05 02:18 AM

actaully, if you have supra rims, or any other rim which uses the same style of lugnut seat, they WILL fit.

no lies guys, i bolted my MKII 14x7's to my 83 gsl
the centerbore is identicle too.

these lugnut seats are the crazy ones where the nut has a sleeve that goes down through the hole in the rim, so the rim applies force against the nut, and not the stud.

the offset is also pretty close to zero, meaning that the rim makes the cars stance much wider.

also, captain homebrew here managed to force mustang 15x7 4x108mm rims onto the gsl.. it was hard the first two times, but gets easier with practice (and hole elongation due to impact torquing)

nick1 12-26-05 09:19 PM

i sent you a pm with all i know on the subject

hope it helps


All times are GMT -5. The time now is 12:14 AM.


© 2024 MH Sub I, LLC dba Internet Brands