Where to get water housing
I need to find a water housing for 12a i dont know if 13b fits on or if there the same but i need something to bolt my water pump to. I have been searching for a web site to buy one even if it is both the housing and pump together but havent found one that sells it, and at the records there isnt even a rx7. i have no clue what to do
|
|
|
Originally Posted by jays83gsl
Those are FC and FD housings. Are there no junkyards in B.C.? |
Wow, you're right. I'll be damned O_O
|
An fc housing will work, and it's much lighter. Just need the early one with 2 bolts holding the thermostat housing.
|
12-A housings. I have several but Im lazy in shipping. When you get one, be sure to tap the back of the housing with 3/8 pipe so you can install an aftermarket gaue.
|
atkins rotary would ba another good source.
|
Originally Posted by hammmy
Those are FC and FD housings.
Are there no junkyards in B.C.? |
Originally Posted by wackyracer
12-A housings. I have several but Im lazy in shipping. When you get one, be sure to tap the back of the housing with 3/8 pipe so you can install an aftermarket gaue.
if i find one on the net iam not even shipping to canadamy aunt lives across the boarder adn is gunna drive it across thats how i got my car in the first place.... and i want to learn more about tapping this housing.....how much would it cost to get one of these after market gauges and does it just show temp or somethign iam lost |
I have one for a 13B SE if you want to buy one. PM me if you want to discuss.
|
Dude I have like 3 12A's in my guarage 25 bucks and its yours. I can tap the hole if ya like even ... well I think if my drill press will work. :(
|
Originally Posted by Hades12
I have one for a 13B SE if you want to buy one. PM me if you want to discuss.
will the 13b fit |
so an S4 housing will bolt on a 12a? how is it lighter, less material or aluminum?
|
Originally Posted by thekyl
Dude I have like 3 12A's in my guarage 25 bucks and its yours. I can tap the hole if ya like even ... well I think if my drill press will work. :(
|
http://img.photobucket.com/albums/v3...r/DSC04953.jpg
there ya go. sorry about the delay. been busy lately. |
i c and there is no problems with it leaking there
|
no leaks at all. I always use liquid teflon on all fittings. The SE and 86+ will work but will require more work since the orignal sensor is smaller and there is an extra fitting,that goes in the original intake manifold) that needs be welded shut or plugged (which is UGLY IMHO).
|
|
|
Several of us have them. I have two of them. PM me.
thekyl up above offered you one for $25, I will do the same. |
If Any one can help me out in getting one of these would be great i need one still
|
I still have one waiting on you.
PM and we can get it taken care of. |
All times are GMT -5. The time now is 02:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands