Where to get 39/8 4.87:1 CWP for GLS-SE diff.?
 

Happy to buy one new with bearings, seals and shims.

whats a CWP?

Crown Wheel and Pinion I bet! Google make me smart sometimes. Either that or its a Concealed With Permit to carry a weapon or a Certified Web Developer.

if a certified web developer, walked into a bar called the crown wheel pinion with a concealed permit?

Thanks for the giggle lads.

Yes, crown wheel & pinion.

Mazda USA has one, 1312-27-110A,
the Kia Part Number is 0K014-27-110, its much less expensive.

Information diamond right there!

I have a very good friend who is a MOBIS dealer.

Might you have Kia part numbers for bearings, shims, washers and seals?

All the guts will be Mazda OEM parts or equivalent.

The KIA gear set is compatible with the rest of the Mazda parts.

If you are looking for a whole assembly, I don't think that exists new.

Rebuilding the actual LSD clutchpack can get very expensive if replacing all shims etc. I cant find the link now but there was a webpage that outlined the costs and I believe it was around $600. The GSL-SE diff unit is compatible with early Miata and FC diff's.

These links have a lot of good info:

https://www.mazdatrix.com/g6.htm

https://www.rx7club.com/1st-generati...torial-711712/

i do, most of it is the Mazda number with an 0 in front of it. Kia used Mazda designs until they were bought by Hyundai in the late 90's, the 95-?? Sportage used a Mazda diff, the FRONT diff is the same as the Rx7, the Rear is larger.

for the limited slip, Mazda had clutch type, viscous (under-rated) and Torsen, but if you're going racing OS Geiken is hard to beat!

i did a Kia vs Mazda for the bearings and such.
https://cimg5.ibsrv.net/gimg/www.rx7...2f91ef7352.png

Much thanks!