I'm sure he has them for the same reason you all have yours. He likes them.

It is a bit extreme, but hell, it's his car and if he likes it... all the power to him.

the car will receive wide fender, thats the point of the wheels.

oh ok, that makes a lot more sense.

Makes sense, like that I was wondering if the tires ruined the fenders every time you hit a bump. Love the color of the car though and can't wait to see it finished.

i cant run like that here in quebec ill get pulled the first corner a cop see me haha i just put wheels on for picture, anyway the car sleep in snow right now

:wtf1: :Wconfused damn... the first pic looks like spare tires... to which his own I guess

lol wtf spare tire ? how can you say they look like spare tire when you dont even see where the tires end.. ??

flared or not, you have the wrong backspace and size. that car reminds me of the 80's when the lowered mini-pick up trucks were around.

as far is i know, this IS a 80's car and I won't mod it like a 2009.

you know nothing about the 80's I can tell. the 80's mini-p/u looks like a frog since most of them are running spacers to make the tires stick out OR are using rims that are wider in the outside than inside.

As far as I know the only company that can get them is Mariah Motorsports. After shipping they would come to around $3000US. Alot of people don't have that kind of scratch lying around, or have more important things to spend it on. I'm willing to save that much and I looked into them but have my mind set on something else.

17" ANZ wheels

I have some 14x6" mesh wheels w/ 10mm offset that fit nicely, will try to take some decent pictures and post them later.

what do you think my rims are ? 5 inches outside , 2 inches inside

if you have the right backspace, then it shouldnt stick out that far. now, you want them rims so you can have flares? either way, its not wide enough and its really ugly to find a large gap between the back of rims/tires and the frame/inner fender walls. you may as well add some hydraulic and make your RX-7 into a low-rider. :lol: :lol:

i dont care, this thread is wheel set up on your FB , its not judge my wheels ;) like it or not I do. And i have them, didnt know they would stick that much so I will put flare, i didnt bought wheels so I could put flare? lol. Oh and btw, just to make you love me, my rx7 is getting a v8 swap :)

^^If it's getting a V8 in it, I would definitely put some wider wheels on the back simply for traction. You'll just roast those tires and not go anywhere

there will be 235's ra1 in the back (not in the pic) these are temporary tires.

i like these wheels alot where is the best place to get them at???

most people get them at image in motion but you can get em cheaper on ebay. i think i got my wheels and tires for like 35 - 40% cheaper than my buddy did at image in motion.

i cant see the price on the web, i tried to call but they didnt answer do u know the price i want them 16x8in back and 15x7 in front.. thanks

no clue on prices...sorry dude

JDM Enkei 92's 15x7 +7 offset

http://i195.photobucket.com/albums/z...7/IMG_3212.jpg

http://i195.photobucket.com/albums/z...7/IMG_3214.jpg

oh ok n/p well thanks anyway.

For my FB wheels you'll have to look at my avatar for I am simple-minded and have yet to figure out the pic posting thing. I like my 14" SE stock wheels. I don't see them that often and when I do I appreciate Mazda's design. Any thoughts? Is there a name for them? (I am only aware of the SA's "waffle" name.)

15x6.5 SSR Mesh dont remember offset.

Damn.. Wish I had SSR Mesh, so hard to find.

Old school mesh in general is hard to find :lol:

cleannn!!!

no its not hard to find BUT THEY ARE EXPENSIVE :lol::lol::lol::lol::lol:

I like my ARE mesh but would kill for a set of those SSR's ^

i like the blck wheels what are they called and who makes them??

16x8 SSR...custom drilled to 4x110. I believe its the only one in the entire US since they were special ordered from Japan but, dont quote me...fucking salesman will say every fucking bullshit in the book to make a sale. I could have bought a rolling RX-3 for the price I paid:lol::lol:

15 inch black w a polished lip riken meshies on my se7en

http://i44.photobucket.com/albums/f1...%20FB/FB07.jpg
http://i44.photobucket.com/albums/f1...%20FB/FB13.jpg
Konig DTD Ziege 16x8 with Kumho Ecsta ASX 205/40R16 rubber.
+35 offset



Now I'm really thinking about getting me some of these:
http://www.1010tires.com//images/whe...lg_enlarge.jpg
5Zigen FN01RC 17x7 front and 17x8 rear
i can get them in either +35 or +42 offset...which do you all think? (or maybe the +42 on the rear with spacers?)

I think its worth. Your 3 looks sweet, besides I dont think you have any more room for another car. You know us we like those new syle type rims

rx4 wheels widened to 7" and stock ride height.

https://i83.photobucket.com/albums/j...Picture007.jpg
https://i83.photobucket.com/albums/j...Picture003.jpg

I like those, it would look great with a drop!

I just picked up some 13x8 revolutions from Trochoid. I'll be throwing my 215 Sumitomos on them for the Dragon in April... :)

Kentetsu, you could snug some 225's under there. ;)

I certainly could, if I wanted to run Hoosiers. Finding that size in a real street tire is not easy. But I do runn 225s on the Diamond wheels, which have the same backspacing as the Revo's and they fit with plenty of clearance... :)

Damn wacky, here I was thinking I was the only one with a set of 4x110 SSR MK's!

http://img.photobucket.com/albums/v1...CT0178-1-1.jpg

15x6.5 SSR MK-III +19 offset (Type B) with 195/55-15

I would love to find a wider set and swap out the shells to go to 8.0-9.0 wide in the back.

definitely will once i decide on a setup, and of course $$.

I've got 225 kumho's on the back and 205 kumho's on the front. I've got a special guy for me who could find just about anything, and he mounted them and ballanced them all for $250 bucks.... thats including tire price. ;)

Zender 15x7 4x110 pcd 38mm offset
Front : 195/50-15 tyres, 5mm spacers to clear struts
Rear : 225/50-15 tyres, rear springs 1" cut
Tokico HP Blue Shocks & Racing Beat Springs

http://i190.photobucket.com/albums/z...s/P1010814.jpg
http://i190.photobucket.com/albums/z...s/P1010823.jpg
http://i190.photobucket.com/albums/z...s/P1020337.jpg
http://i190.photobucket.com/albums/z..._8235Large.jpg

What is with you and that honey comb on your psg headlight???? lol :)

i believe it is the limited edition beehive oil cooler which sucks a lot of air than CAI, lol. Naah, i'm just kidding bro :)

it was on there one summer so i wanted to see how long it would stay on there.

Wheels
 

My new wheels, 15 x 7 , 22 offset and Falken 205/50/15, RB springs. PRIME wheels with a Ford bolt-pattern 4 x 108 modified by a friend to fit 4x110.
He also made some adapters to keep the wheels centered.
http://i59.photobucket.com/albums/g3...y/IMG_1304.jpg
http://i59.photobucket.com/albums/g3...y/IMG_1306.jpg
http://i59.photobucket.com/albums/g3...y/IMG_1305.jpg
Adapters:
http://i59.photobucket.com/albums/g3...y/IMG_1298.jpg
http://i59.photobucket.com/albums/g3...y/IMG_1299.jpg