wheel rotor swap from 2nd gen?
 

Im trying to find wheels, but of course there is nothing for the 110x4 bolt pattern, what i want to do is get rotors from a 2nd gen. Would they fit?, if not does anyone know where to get gsl-se rotors from? thanks

Wont work, whole setup is different, bearing size everything...

damn

would it be possible to put the whole suspension and brakes from a 2nd gen into a 1st gen? Are the suspension setups similar?

it would be possible, third gen too, but costly. there is a lot of custom fabrication necessary

Heaps of people have put 2nd gen brakes on a 1st gen but as riffraff said it takes a bit of fabrication.

Re: wheel rotor swap from 2nd gen?
 

You need to do a swap for SE rotors/axles/brakes.

Hawk Brake Pads or Kevlar Pads, Replace your Brake Fluid with Racing fluid, and you'll be more than happy.

Re: Re: wheel rotor swap from 2nd gen?
 

Dont think the braking ability is the reason for wanting to change. He wants to get a bolt patern he can get som 'phat' wheels for :)

Re: Re: Re: wheel rotor swap from 2nd gen?
 

Oh..:doh:

In that case either the SE Swap mentioned above..(Cheapest)
Or have someone Custom Drill New Wheels, (Expensive) OR
Custom make the rotors to accept 4 or 5 lugs.(VERY Expensive)

did all third series have the larger axels, or was that only on the gsl-se

Only SE.

There's a thread in the Canadian Forum about a custom kit Guru is working on to put 2nd gen rotors in a 1st gen...

what i have seen before, my mate put series 4 stuts into his '83 they ajustable and he just changed over the stut patforms on top. that what he told he did,

From Mazspeed.com:
http://www.mazspeed.com/4%20Piston%20conversion.jpg
http://www.mazspeed.com/4%20piston-1.jpg
http://www.mazspeed.com/4-piston-brake.jpg