whats my carb worth?
 

once again, not wanting to ask too much, but not wanting to get ripped off myself..
I have a 45 dcoe with a lake cities style manifold for a 12 a
functions perfectly, BUT, there were 2 small holes drilled in the top cover, that were filled with JB weld, some of you saw the pics in the classifieds, I've since removed most of the jb weld to see how bad it really was... here are the current pics
http://i18.photobucket.com/albums/b1...u/2c3dcdc5.jpg
the only jb weld is the two dots to the right of the jet cover

if it hasnt been rebuilt... i'd say a few hundred bucks. 300 - 400 is fair.

3-400 for intake and carb?

yyyyyeep. hell they go cheaper on ebay sometimes. you can pick up 45dcoe's for around 150 bucks on average. they usually need to be rebuilt but you can find them. if this was rebuilt and didnt have holes drilled in it i'd say 4- 500 tops. gotta remember, most of us rx7 owners are broke. :p:

I was going to say $200!

I didn't realize they were that expensive.

well weber prices have gone up since the strike and what not.