Using GSL axle hardware on RX-2, need some help
I'm fitting an early 83 GSL diff and brakes to my RX-2 and need a little help. I'm using the RX-2 Axle unmodified.
1.) what fluid do I use in the GSL LSD? 2.) Locating links look the same as the RX-7. Anybody know if urethane bushings for RX-7 will fit the RX-2 links? What's the ID and thickness of the locating link ends? I can measure mine to see if they'll work. 3.) Rebuilt calipers - My current calipers have blown piston seals and the piston face is destroyed by too many kids with pliers trying to replace pads. If I get reman calipers, will the piston be new and un-destroyed? Where's the best place to buy calipers without spending too much? |
you use standard SAE 90 weight but that is formulated for limited slip differentials.
|
How about rebuilt calipers? Do they usually get new pistons, or are you just as likely to get another chewed up pair?
|
I dot know what happened to my post lat night. so here we go again.
the 81-83 GSL 3rd member is a straight swap to a RX-2. For the front calipers, you can try using a SA front brake calipers as I did it in my recent RX-4 project. I also know a good shop here in LA that can rebuild them including the brake booster (you may as well get that done also). Im sure I have several calipers from those vintage rotaries. If ur interested, i will look for them and see how it will cost to get them rebuilt....just pay for rebuilt costs/shipping + I need your old ones for core. |
All times are GMT -5. The time now is 12:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands