Transmission Mount Help
 

So I'm in the process of putting my car all back together and stupidly didn't pay attention to how everything came apart. :(

My concern is the transmission mount/subframe.

What I have is the brace, two rubber pieces, one stayed on the brace, the other came off but the one that came off looks thicker. I then saw two other rubber bits that fit nicely with a metal plate at the top of the brace and between the actual chassis.

Is this right? Here are a few photos explaining it. I'll try to find a FSM online to see if I can't find a breakaway photo.

Driver Side:

http://farm8.staticflickr.com/7281/8...044eb52d_z.jpg

http://farm8.staticflickr.com/7288/8...003e56e8_z.jpg

Passenger Side:

http://farm8.staticflickr.com/7294/8...910b025f_z.jpg

http://farm8.staticflickr.com/7286/8...378df99d_z.jpg

looks about right. sandwich the mount between 2 rubber doughnuts, then slip big washer on the stud, and then the lock washer and nut

Cool that's what I have, it's just one of the rubber pieces is quite a bit thicker than the other. It's not sitting weird or anything it's just worrying me. :p