Too bad........
 

http://i3.ebayimg.com/04/i/06/1b/1e/d4_1_b.JPG

They dont make these pulley sets for 12a's do they? :mad:

they make them for a 13b???

This is for a 3rd gen >< I hate the lack of aftermarket support, that pulley set is so FREAKIN COOL!!!

if its a alt pulley you might be able to if you convert to 3g alt but i have never seen that dsone i want to try tho i have seen 2g onversion but never 3g conversion ehhehe i am nut sure if they are much diffrent.

if that's a V-belt pulley it should work on any alt.

sliverrotor was for a while saleing a kit to put a 3rd gen alt in an FB.





.

Hmmmm, interesting thought.... maybe I should have thought of it :) oops....

you can still do the same thing as the kit.

All you need is to find a used 3rd gen alt, should run you about 50 bucks in the for sale section. all you need to do is make sure you get the plug that goes into the alt and you should be set.

Because all silverrotors did was put a single or dual pully on the alt.

So just buy a alt and switch it out with the pully.

Here is a site that sells them
http://rx7cz.net/shop/

Loki, I absolutely love your 7. Looks so great with that lip in the back and the targa band.

Also, I think that would be one great looking pulley set. If I had everything else I want done to my car done, I would sport it.

Thanks, I think it needs lowered still. Mods are coming along slow, I spent alot of my savings getting it to this point :) oops.....

We were actually discussing these on the OhioRotaries board a few months ago.

When I was bragging about my MazdaSpeed RX7 oil cap.

http://i11.photobucket.com/albums/a1...7/IMG_0424.jpg

The site says FC FB,
I bought one off ebay and have it on my 12a alt, no problems except getting the right size belts, width wise.

heh tell me about it.