austinramsay |
08-13-14 06:42 PM |
Starter just wont crank, going crazy here:(
Bought an FB a few days ago and am trying to get it running again. There was an alarm preventing it from starting so i removed it. Can anyone verify what the black with red stripe wire from the ignition switch is for? I tried finding it on the wiring diagram in the FSM but theres no black/red? How should the ignition switch be wired so I can make sure this is right first? After doing what i think was the correct wiring for the ignition switch, i tried to crank it but the starter just clicked. Which was an improvement over doing nothing at all before. But no matter what i do i cant get it to crank. I tried the battery from my FD in it, I bought a new starter from autozone (it cranked slowly for like 5 seconds, let go, tried again and it started clicking again). The blk/yellow wire is on the starter solenoid, and the + from the battery IS on the starter correctly. Another question, what is the green with yellow stripe wire for on the starter? Where does that go? Does anyone else have any ideas why it wont crank? :( btw i am getting 12v at the battery post that bolts onto the starter.
|