RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   A source for window and door seals** (https://www.rx7club.com/1st-generation-specific-1979-1985-18/source-window-door-seals%2A%2A-395759/)

Todd Staples 02-15-05 04:17 PM

A source for window and door seals**
 
I ran across this distributor in Australia that carries a lot of seals for the RX7. THey priced the Bailey window channel seals each at $20.30 AUD which about $16.00 US. I don't know what shipping would be, but this sounds a lot cheaper than you can get them over here. Has anyone done business with these folks?
http://www.scottsoldautorubber.com.au/

RX7Elmo 02-15-05 04:30 PM

that is considerably cheaper. I've seen ebay sell them for about 50 for a pair of seals.

Bass 02-15-05 04:34 PM

I wonder if they would be interested in offering a group buy for everyone on the forum. Seals are something that you're going to need sooner or later.

Todd Staples 02-15-05 04:45 PM

I don't know about that. I will probably order some window seals and find out how they are to deal with. They are supposed to let me know what shipping will be. I know those window seals from VB are about $40 each, so that is about 50% less. I will keep everyone updated as to how it goes. I also emailed them to see if they make the taillight seals and rubber trim pieces.
TCS

skrewloose78 02-15-05 09:04 PM

i wonder how much shipping is?see if you can talk to them about a group buy,i know i need 2 sets

Mrowwolg 02-15-05 09:11 PM

I'd be interested too!

calvinpaul 02-15-05 11:32 PM

Me too.

nopiston_racer 02-16-05 12:28 AM

same here

CHEF_EG_1 02-16-05 01:25 AM

me too...

jays83gsl 02-16-05 03:56 AM

I second that notion. . . . I lost count, so I'm sticking with seconding.

Todd Staples 02-16-05 07:35 AM

I checked the shipping to the USA for Bailey channel seals for two doors and it's about 18.00. I also found out that it is just the straight seal strips that would have to be formed and possibly cut at a 45 degree or so at the corners for a good fit. If a person went this route, they could probably find the same trim strips local or at least in the states.
TCS

Pele 02-16-05 11:00 AM

:werd:


All times are GMT -5. The time now is 05:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands