RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   So it's raining, the kids are asleep and my girlfriend is at work... (https://www.rx7club.com/1st-generation-specific-1979-1985-18/so-its-raining-kids-asleep-my-girlfriend-work-530007/)

$100T2 04-14-06 08:45 PM

So it's raining, the kids are asleep and my girlfriend is at work...
 
So, what does $100T2 do then?

This:

http://i15.photobucket.com/albums/a3...3/P4140014.jpg

Before is on the left, after is on the right.

Nothing like a boring Friday night at home with a disassembled rear-end, 80 grit, and an electric sander. 22 years of grit, grease, and filth sure makes for a lot of work.

Arockrx7 04-14-06 08:46 PM

Evening well spent!

1badFB 04-14-06 09:01 PM

Yours didnt even look too bad before! Before I got mine sandblasted they were absolutely gross, you couldnt tell they were ever black. Seeing those I wish I had taken a picture lol. I think if you clearcoated those theyd probably actually look prety nice, whats the plan? are you going to paint them?

Sammymatik 04-14-06 09:06 PM

Man....

You have way too much time on your hands.

It does look pretty though! you gonna put mirrors on the ground when you park?

Kentetsu 04-14-06 09:09 PM

Nice work man. I did my spare tranny and rear end too, but I used the angle grinder with a wire wheel on it. Takes that junk off in no time, and shines it up like its been polished. Keep up the good work, you'll have a "new" car in no time! :)

MattG 04-14-06 09:11 PM

^^ lol

Looking good.

$100T2 04-14-06 10:24 PM


Originally Posted by Gen1onr
Yours didnt even look too bad before! Before I got mine sandblasted they were absolutely gross, you couldnt tell they were ever black. Seeing those I wish I had taken a picture lol. I think if you clearcoated those theyd probably actually look prety nice, whats the plan? are you going to paint them?

Yeah, I'm going to paint them a nice gloss black. Same with my rear-end, calipers, etc. I'm going to repaint my blue shocks red to match the RB springs, and to break up the black a bit. Other than that, just trying to get her as clean and nice as possible.

trochoid 04-14-06 10:44 PM

I don't have the patience for all that sanding and grinding, that's why I built my own blast cabinet. As cleans as your's started, less than 10 minutes in the cabinet, and I get to stay clean and not breath all the dust.

Good job, and you do seem to have a lot of time on your hands, are you the hausfrau?

Paradox 04-14-06 10:46 PM

groovy, you doing anything with the rear end itself? i'd like to sandblast mine and paint it all up since ya, the rust on mine looks almost as bad as your old one did. hehe

$100T2 04-14-06 11:53 PM


Originally Posted by trochoid
I don't have the patience for all that sanding and grinding, that's why I built my own blast cabinet. As cleans as your's started, less than 10 minutes in the cabinet, and I get to stay clean and not breath all the dust.

Good job, and you do seem to have a lot of time on your hands, are you the hausfrau?

Nein, ich bin nicht die hausfrau.

I just found out my air compressor will support a sandblaster, so it's go time as soon as I buy that.

$100T2 04-14-06 11:55 PM


Originally Posted by Paradox
groovy, you doing anything with the rear end itself? i'd like to sandblast mine and paint it all up since ya, the rust on mine looks almost as bad as your old one did. hehe

I painted the rear-end with high temp paint, but now I'm thinking of blasting it and repainting it.

trochoid 04-15-06 12:11 AM


Originally Posted by $100T2
Nein, ich bin nicht die hausfrau.

I just found out my air compressor will support a sandblaster, so it's go time as soon as I buy that.

LOL. My German is 30+ years old, and I actually understood that.

$100T2 04-15-06 07:33 AM

I had to think about it... It's been 17 years since German class.

$100T2 04-15-06 02:52 PM

Alright, I have a sandblasting gun, 150 pounds of sand, and two hours to kill. Here goes nothin'.

Pics to follow.

OnlyOnThurs 04-15-06 02:57 PM

Man Hurry Up Your Taking Forever..... ;)

MattG 04-15-06 03:03 PM

Goo! I wish I still had my shop, With my two hours to kill before work its spent playing halo, and riding the longboard

RustyRotary 04-15-06 03:54 PM


Originally Posted by $100T2
Nein, ich bin nicht die hausfrau.

Lol. Machen Sie einen sandwich fur mich, Weibchen

Sandblasters are invaluable. With a couple hours plus some various polishing devices I got my wheels looking brand-spankin' new.

$100T2 04-15-06 08:18 PM


Originally Posted by RustyRotary
Lol. Machen Sie einen sandwich fur mich, Weibchen

Sandblasters are invaluable. With a couple hours plus some various polishing devices I got my wheels looking brand-spankin' new.

It's not Weibchen, it's Liebchen. ;)

That sandblaster was kind of a disappointment.

trochoid 04-15-06 08:31 PM

Explain.

Rotary Weasel 04-15-06 08:43 PM

wunderbar!! nette arbeit :icon_tup:

85-GSL 04-15-06 08:52 PM

^^ cute work?

its been 4 days sence deutsch classe fur mich, meine deutsch ist nicht gut, meine englisch ist nicht besser.

so why is the sandblaster a dissapointment?

RustyRotary 04-15-06 09:26 PM


Originally Posted by $100T2
It's not Weibchen, it's Liebchen. ;)

that was make a sandwitch for me bitch, not sweetheart. hence the weibchen lol

$100T2 04-15-06 10:48 PM


Originally Posted by trochoid
Explain.

It kept clogging... I don't know what the deal was. I guess I need to sift it better before using it next time.

trochoid 04-16-06 02:12 AM

If it clogs in the tank, it's moisture, if it's the tip, I use a window screen to sift mine.

$100T2 04-16-06 07:58 AM

It kept clogging in the pickup of the hose. I think I need to sift it better.


All times are GMT -5. The time now is 10:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands