RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   1st Generation Specific (1979-1985) (https://www.rx7club.com/1st-generation-specific-1979-1985-18/)
-   -   sebring mufflers, fit on road race RB system? (https://www.rx7club.com/1st-generation-specific-1979-1985-18/sebring-mufflers-fit-road-race-rb-system-219015/)

WanKeL FD RX-7 08-28-03 11:35 PM

sebring mufflers, fit on road race RB system?
 
I have the Road race system from Racing Beat, I'll have a gsl-se engine with a 13B road race header, and 2 presilencers, but i want a deep sound, i heard sebring mufflers sounds awesome on rotaries so i might get one if it's worth it.

What is the diameter of the racing beat exhaust line ? 2.25 or 2.5 inches ? I would replace my RB muffler with the sebring one and keep the RB one if police stops me often :) .

Tell me what you think! :)

Thanks

Max

Mr BiG G 08-28-03 11:39 PM

even if it isn't the same size....u can use an exhaust adaptor....they are pretty cheap at canadian tire

WanKeL FD RX-7 08-28-03 11:41 PM

thanks gufran :)

FB II 08-29-03 12:13 AM

are you serious?? a chrysler sebring muffler??? if you do this, i gotta hear it. make a sound clip :eek:

DriveFast7 08-29-03 12:20 AM

i had a 2.5" piped 6" round 18" long straight thru Magnaflow muffler with the RB dual presilencers and header. 12a streetport. Sounded real good. You knew it was a rotary. Made more power than the RB primaflow.

Difficult to hold a conversation @ 80mph+. Constant buzz at that rpm.

Revved like a champ though. If you can get a sebring muffler that is offset in/out it would make it quiter. As would one of those Monza dual exhaust tips with the resonators in them. Wish I went that route!

Sk8r_dude 08-29-03 01:10 AM


Originally posted by FB II
are you serious?? a chrysler sebring muffler??? if you do this, i gotta hear it. make a sound clip :eek:
sebring performance :p: lol i have a sebring mufler. its a litttle loud, i used a cherry bomb as a presilencer on mine, sounds good now, definatly rotary.

WanKeL FD RX-7 08-29-03 08:33 AM

Should i get a magnaflow or sebring now? :) :) I can have a sebring muffler for like 137$CDN at my job... it's damn cheap :)

Max

nlc1179 08-29-03 09:19 AM

the rb muffler that comes with it sounds great, you should keep it on there. the sebring muffler will not make it deep, but it will sound like a weedwacker on crack at high rpm's.

Sk8r_dude 08-29-03 10:54 AM

i like the sound.

FB II 08-29-03 12:03 PM

i dunno what i did right, but i love the way mine sounds. it still has that rotary hint to it, but it's very thick and even at 8,000rpms it's thick. no weed whacking sound AT ALL. it's really quite awesome! :D no racing beat except for the header.

Sk8r_dude 08-29-03 12:05 PM

:withstupi

Pedestrian X 08-29-03 11:59 PM


Originally posted by FB II
i dunno what i did right, but i love the way mine sounds. it still has that rotary hint to it, but it's very thick and even at 8,000rpms it's thick. no weed whacking sound AT ALL. it's really quite awesome! :D no racing beat except for the header.
wellll whats is your setup??

Gregs 08-30-03 12:10 AM

sweet... when i graduate i get a 1997 sebring vert... which i plan on upgrading the exhaust on to a flowmaster.... i shold use the stock muff on my rx and se how it sounds

johnrocks 09-06-03 12:45 AM

Use a thermal exhaust muffler. Sebring mufflers on rotaries burns out within months.




Peace-

FB II 09-06-03 11:26 PM


Originally posted by Pedestrian X
wellll whats is your setup??
rb header to collector, turbo II muffler as a presilencer directly out of header, 2.25" piping over the axle to a Tsudo muffler. sounds SOOOOO SWEET! when i get it running again i'll make sound clip :D that is..... if it runs again under the power of the 12a :eek: ;) :eek:

79+80+84_rx-7 09-06-03 11:34 PM

NOT CHRYSLER SEBRING

SEBRING PERFORMANC... they make mufflers... like flow master makes mufflers...


All times are GMT -5. The time now is 11:16 PM.


© 2024 MH Sub I, LLC dba Internet Brands